Fuel Transfer Pump, 12VDC, 20 GPM, 1/3 HP
by GPI
Original price
$612.49
-
Original price
$612.49
Original price
$612.49
$612.49
-
$612.49
Current price
$612.49
| Voltage | 12V DC |
| HP | 3/8 |
| Housing Material | Cast Aluminum |
| GPM | 20 gpm |
| Seal Material | Buna-N |
| RPM | 2000 |
| Pump Design | Gear |
| Self-Priming | Yes |
| Seal Type | Lip |
| Max. Viscosity | 50 SUS |
| Item | Fuel Transfer Pump |
| Compatible Fluids | Diesel, Gasoline, Kerosene, E15 |
| Includes | Fuse Assembly, G20-012PO 12V DC 20 gpm Fuel Transfer Pump, Modular Fitting with Hardware, Tank Adapter |
| Adapter Material | Aluminum |
| Pressure Range | 16 psi |
| Nozzle Material | Not Applicable |
| Motor RPM | 2,000 RPM |
| Agency Compliance | Class I, Division 2, Group D, cULus |
| Metered | No |
| Standards | Class I Div 1, cULus Listed, IECEx/ATEX Zone 1 |
| Transfer Pump Application | Stationary Installations, Stationary Locations in Fleet |
| Motor Enclosure | Explosion Proof |
| Max. Head - Pumps | 9 ft |
| Features | Self priming, Powder-coated aluminum body,telescoping suction pipe (15in - 40in), Factory installed power Cord, Easy installation spin collar mount, Explosion Proof Motor, Thermal Overload Protection |
| For Use With | Diesel, Gasoline, Kerosene, E15 |
| Bypass Valve | Yes |
| Housing Material - Pumps | Aluminum |
| Duty Cycle | 30 Minutes On/30 Minutes Off |
| Wetted Materials | Not Applicable |
| Bearing Type | Sleeve |
| Hose Cover Material | Not Applicable |
| Discharge Connection Type | FNPT |
| Max. Flow Rate | 20 gpm |
| Suction Tube Material | Polypropylene |
| Filter Included | Not Applicable |
| Max. Fluid Temp. | 125 Degrees F |
| Includes Spout | No |
| Motor HP | 2/5 hp |
| Hose Tube Material | Not Applicable |
| Housing Finish | Powder Coated |
| Nozzle Fluid Compatibility | Not Applicable |
| Suction Tube OD | 1 in |
| For Media Type | Avgas, Diesel, Gasoline, Jet A-1, Kerosene |
| Runs Dry | No |
| Frequency (Hz) | 60 Hz |
| Variable Speed | No |
| Food Grade | No |
| Pump Connection Type | FNPT |
| Max. Outlet Pressure | 12 psi |
| Number of Phases | 1 |
| Includes Discharge Hose | No |
| Meter Unit Of Measure | Not Applicable |
| Min. Fluid Temp. | -20 Degrees F |
| Mount Type | Bung |
| Compatible Chemicals | AVGAS, Diesel, Gasoline, Jet A, Kerosene |
| Diesel Exhaust Fluid Compatible | No |
| Spout Material | Aluminum |
| Thermal Protection | Yes |
| Meter Type | Not Applicable |
| Includes Nozzle | No |
| Explosion Proof | Yes |
| Full Load Amps | 40.0 A |
| Includes Bung Adapter | Yes |
| Adapter Connection Type | MNPT |
| Power Source | Electric |
| Rated Voltage | 12V DC |
| Nozzle Operation | Not Applicable |
| Includes Suction Tube | No |