Grinder Pump System, Duplex, 115V
Original price
$4,608.75
-
Original price
$4,608.75
Original price
$4,608.75
$4,608.75
-
$4,608.75
Current price
$4,608.75
HP | 1 hp |
Phase - Pumps | 1 |
Switch Actuation | Tether Float |
Base Material | Cast Iron |
Flow Rate @ 10 Ft. of Head | 42 gpm |
Max. Head | 50.0 ft |
Impeller Material | Cast Iron |
Pump HP | 1 |
Motor RPM | 3450 |
Thermal Protection | yes |
Voltage - Pumps | 115VAC |
Off Point | 4.7 in |
GPM of Water @ 25 Ft. of Head | 32 |
Discharge NPT | 2" F |
GPM of Water @ 15 Ft. of Head | 39 |
Item - Sump/Sewage Pump Systems | Grinder Pump System |
GPM of Water @ 5 Ft. of Head | 44 |
GPM of Water @ 20 Ft. of Head | 36 |
Handle | yes |
On Point | 11.7 in |
Shaft Seal | SIC |
Agency Compliance | CSA, UL 778 |
Input Phase AC | 1 |
Item | Grinder Pump System |
Max Head - Pumps | 50 ft. |
Max. Head - Pumps | 50 ft. |
Switch Type | Panel Controlled |
Hz | 60 |
Phase | 1 |
GPM of Water @ 40 Ft. of Head | 15 |
Voltage | 115 |
GPM of Water @ 35 Ft. of Head | 22 |
Amps | 12 A |
GPM of Water @ 10 Ft. of Head | 42 |
Motor Type | CSCR |
Duty | Intermittent |
Inlet | 4 in FNPT |
Switch Type - Pumps | No Switch Included |
Amps - Pumps | 12.00 |
Max. Liquid Temp. | 140 Degrees F |
GPM of Water @ 45 Ft. of Head | 10 |
GPM of Water @ 30 Ft. of Head | 27 |
Includes | Alternating Control Panel, Pump Controller |
Impeller Material - Pumps | Stainless Steel |
Bearing Type | Ball |
Pump Body Material | Cast Iron |
RPM | 3,450 RPM |
Duty Cycle | Intermittent |
Flow Rate @ 30 Ft. of Head | 27 gpm |
Flow Rate @ 15 Ft. of Head | 39 gpm |
Flow Rate @ 20 Ft. of Head | 36 gpm |
Inlet Standard | NPT |
Flow Rate @ 5 Ft. of Head | 44 gpm |
Switch Electrical Connection | Integral |
Number of Pumps | 2 |
Rated Voltage | 115V AC |
Inlet Gender | Female |