Hydronic Circulating Pump, 1/6 hp, 120v, 1 Phase, Flange Connection
Original price
$507.49
-
Original price
$507.49
Original price
$507.49
$507.49
-
$507.49
Current price
$507.49
| Voltage | 120v |
| Item | Hydronic Circulating Pump |
| HP | 1/6 hp |
| Housing Material | Cast iron |
| Phase - Pumps | 1 |
| Phase | 1 |
| Pump Type | In Line Centrifugal |
| Connection Style | Flange |
| Max. GPM @ Head | 31 gpm @ 1 ft |
| Min. GPM @ Head | 2 gpm @ 44 ft |
| Series | E.2 |
| Shut-Off | 43 ft |
| Impeller Material | 30% Glass-Filled Noryl(R) |
| Voltage - Pumps | 120V AC |
| Thermal Protection | yes |
| Flange/Union Included | No |
| Max. Temp. | 230 Degrees F |
| Mechanical Seal | Silicon Carbide Enviroseal Coupled with Viton(R) Elastomer |
| Shaft Material | Stainless Steel |
| Compliance | NSF-372 |
| HVAC Circulating Pump Type | Hot Water Circulating Pump |
| Drive Type | Direct |
| Features | Compact, High Performance, Permanently Lubricated Ball Bearings |
| RPM | 3,250 RPM |
| Pump Mount | In Line |
| Loop Configuration | Closed |
| Number of Speeds | 1 |
| Max. Operating Pressure | 150 psi |
| Includes | Flange Gaskets |
| Housing Material - Pumps | Cast Iron |
| Amps | 1.50 |
| Best Efficiency GPM @ Head | 22 gpm @ 21 ft |
| Maximum Feet of Head | 43 ft |
| Series Family | E.2 |
| Maximum Flow Rate @ 40 Feet of Head | 4 gpm |
| Pump Housing Material | Cast Iron |
| Nameplate Voltage | 120V AC |
| Number of Intakes | 2 |
| Maximum Flow Rate @ 1 Feet of Head | 38 gpm |
| Compatible Media Type | Water |
| Maximum Flow Rate @ 15 Feet of Head | 28 gpm |
| For Use With Potable Systems | No |
| Body Gasket Material | EPDM |
| Maximum Flow Rate @ 50 Feet of Head | [DELETE] |
| Maximum Flow Rate @ 20 Feet of Head | 22 gpm |
| Maximum Flow Rate @ 5 Feet of Head | 36 gpm |
| Maximum Operating Pressure | 150 psi |
| Maximum Flow Rate @ 30 Feet of Head | 14 gpm |
| Frequency | 60 Hz |
| Maximum RPM | 3,250 RPM |
| Flange or Union Included | Yes |
| Phase and Brand | ARMSTRONG PUMPS INC. Single Phase |
| Connection Type | Flange |
| For Use With | Hydronic Systems |
| Maximum Flow Rate @ 25 Feet of Head | 18 gpm |
| Maximum Flow Rate @ 10 Feet of Head | 32 gpm |
| Maximum Media Temperature | 230 Degrees F |
| Horsepower | 1/6 |
| Minimum Media Temperature | 32 Degrees F |
| Number of Flange Mounting Holes | 2 |