Skip to content

1/10 HP PPS Magnetic Drive Pump 115V 1" FPT

Original price $569.99 - Original price $569.99
Original price
$569.99
$569.99 - $569.99
Current price $569.99
Item Magnetic Drive Pump
HP 1/10 hp
Voltage 115
Inlet 1 in FPT
Outlet 1/2 in MPT
Max. Head 24.3 ft
Operating Pressure 10.5 psi
Housing Material PPS
GPM of Water @ 6 Ft. of Head 12.7
Impeller Material PPS
Max. Specific Gravity 1.1
GPM of Water @ 18 Ft. of Head 7.2
Temp. @ 20 psig 145 Degrees F
Max. Viscosity 100 SSU
GPM of Water @ 15 Ft. of Head 9.1
Series MD-HC
Temp. @ 10 psig 165 Degrees F
Bearing Type Thrust
Motor Enclosure TEFC
Cord Type 3-conductor SJO
Motor Type PSC
Design Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level
GPM of Water @ 9 Ft. of Head 11.8
Application For Highly Corrosive Chemicals, Eliminates Seal-caused Friction Loss, Wear, Contamination and Leakage
Mounting Horizontal
Full Load Amps 1.70
Gasket Material FKM
Temp. @ 30 psig 135 Degrees F
GPM of Water @ 3 Ft. of Head 13.2
Temp. @ 0 psig 180 Degrees F
Flow Rate @ 40 ft of Head (Maximum) Not Applicable
Feet of Head (Maximum) 24.3 ft
Horsepower (Maximum) 1/10 hp
Phase Single
Motor Mounting Type Horizontal
Intake Pipe Type FNPT
Flow Rate @ 9 ft of Head (Maximum) 11.8 gpm
Full Load Current 1.7 A
Discharge Port 1/2 in NPT
Media Temperature (Maximum) 200 Degrees F
Flow Rate @ 6 ft of Head (Maximum) 12.8 gpm
Operating Pressure (Maximum) 10.5 psi
Flow Rate @ 24 ft of Head (Maximum) 1 gpm
Viscosity (Maximum) 100 SUS
Flow Rate @ 3 ft of Head (Maximum) 13.5 gpm
Flow Rate @ 50 ft of Head (Maximum) Not Applicable
Nameplate Voltage 115V AC
Suction Port 1 in FNPT
Flow Rate @ 15 ft of Head (Maximum) 9.2 gpm
Discharge Pipe Type NPT
Specific Gravity (Maximum) 1.1
Flow Rate @ 18 ft of Head (Maximum) 7.5 gpm
Frequency 60 Hz

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare