Skip to content

1/30 HP PPS Magnetic Drive Pump 115V 1/2" FPT

Original price $382.49 - Original price $382.49
Original price
$382.49
$382.49 - $382.49
Current price $382.49
Item Magnetic Drive Pump
HP 1/30 hp
Voltage 115
Inlet 1/2 in FPT
Outlet 1/2 in MPT
Max. Head 14.6 ft
Operating Pressure 6.3 psi
Housing Material PPS
GPM of Water @ 3 Ft. of Head 7.5
Temp. @ 0 psig 180 Degrees F
Impeller Material PPS
Series MD-HC
Temp. @ 30 psig 135 Degrees F
Temp. @ 10 psig 165 Degrees F
Mounting Horizontal
Motor Enclosure OPFC
Max. Viscosity 100 SSU
Application For Highly Corrosive Chemicals, Eliminates Seal-caused Friction Loss, Wear, Contamination and Leakage
Temp. @ 20 psig 145 Degrees F
Max. Specific Gravity 1.1
Gasket Material FKM
Full Load Amps 1.70
Cord Type 3-conductor SJO
Design Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level
Bearing Type Thrust
GPM of Water @ 6 Ft. of Head 6.5
GPM of Water @ 9 Ft. of Head 5.5
Nameplate Voltage 115V AC
Flow Rate @ 6 ft of Head (Maximum) 6.8 gpm
Operating Pressure (Maximum) 6.3 psi
Full Load Current 1.7 A
Flow Rate @ 24 ft of Head (Maximum) Not Applicable
Flow Rate @ 3 ft of Head (Maximum) 7.8 gpm
Intake Pipe Type FNPT
Ambient Temperature (Maximum) 77 Degrees F
Horsepower (Maximum) 1/30 hp
Feet of Head (Maximum) 14.6 ft
Flow Rate @ 50 ft of Head (Maximum) Not Applicable
Frequency 60 Hz
Specific Gravity (Maximum) 1.1
Discharge Pipe Type NPT
Flow Rate @ 18 ft of Head (Maximum) Not Applicable
Motor Mounting Type Horizontal
Phase Single
Viscosity (Maximum) 100 SUS
Flow Rate @ 9 ft of Head (Maximum) 5.5 gpm
Discharge Port 1/2 in NPT
Media Temperature (Maximum) 200 Degrees F
Flow Rate @ 40 ft of Head (Maximum) Not Applicable
Suction Port 1/2 in FNPT
Flow Rate @ 15 ft of Head (Maximum) Not Applicable

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare