1/35 HP PPS Submersible Magnetic Drive Pump 115V 1/2" MPT
Original price
$261.24
-
Original price
$261.24
Original price
$261.24
$261.24
-
$261.24
Current price
$261.24
Item | Magnetic Drive Pump |
HP | 1/35 hp |
Voltage | 115 |
Inlet | 1/2 in MPT |
Outlet | 1/4 in MPT |
Max. Head | 12.8 ft |
Operating Pressure | 5.5 psi |
Housing Material | Polypropylene |
Bearing Type | Thrust |
Motor Enclosure | Sub |
Impeller Material | Polypropylene |
Gasket Material | Buna-N |
Temp. @ 30 psig | 70 Degrees F |
GPM of Water @ 3 Ft. of Head | 5.0 |
Series | MD-SC |
GPM of Water @ 6 Ft. of Head | 4.1 |
Application | For Mild Chemicals at Moderate Temperature, Eliminates Seal-caused Friction Loss, Wear, Contamination and Leakage |
Design | Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level |
Mounting | Horizontal |
Cord Type | 3-conductor SJP |
Max. Specific Gravity | 1.1 |
Full Load Amps | 0.90 |
Temp. @ 10 psig | 120 Degrees F |
Temp. @ 0 psig | 150 Degrees F |
Max. Viscosity | 100 SSU |
GPM of Water @ 9 Ft. of Head | 2.7 |
Temp. @ 20 psig | 90 Degrees F |
Flow Rate @ 9 ft of Head (Maximum) | 2.7 gpm |
Ambient Temperature (Maximum) | 77 Degrees F |
Intake Type | MNPT |
Horsepower (Maximum) | 1/35 hp |
Flow Rate @ 15 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 40 ft of Head (Maximum) | Not Applicable |
Seal Material | Buna-N |
Motor Mounting Type | Horizontal |
Flow Rate @ 24 ft of Head (Maximum) | Not Applicable |
Feet of Head (Maximum) | 12.8 ft |
Specific Gravity (Maximum) | 1.1 |
Media Temperature (Maximum) | 150 Degrees F |
Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 18 ft of Head (Maximum) | Not Applicable |
Discharge Pipe Type | NPT |
Flow Rate @ 6 ft of Head (Maximum) | 4 gpm |
Discharge Type | NPT |
Frequency | 60 Hz |
Intake Pipe Type | MNPT |
Flow Rate @ 3 ft of Head (Maximum) | 5 gpm |
Operating Pressure (Maximum) | 5.5 psi |
Phase | Single |
Feet of Head (Minimum) | 12.8 ft |
Pump Housing Material | Glass-Filled Polypropylene |
Shut Off Pressure (Maximum) | 5.5 psi |
Horsepower | 1/35 hp |
Viscosity (Maximum) | 100 SUS |
Full Load Current | 0.9 A |
Nameplate Voltage | 115V AC |