1/4 HP Polypropylene Magnetic Drive Pump 115V 1" FNPT
Original price
$641.24
-
Original price
$641.24
Original price
$641.24
$641.24
-
$641.24
Current price
$641.24
Item | Magnetic Drive Pump |
HP | 1/4 hp |
Voltage | 115 |
Inlet | 1 in FNPT |
Outlet | 1/2 in MNPT |
Max. Head | 35 ft |
Operating Pressure | 14.2 psi |
Housing Material | Polypropylene |
Application | Acids, Caustics, DI-Water, Plating Solutions |
Motor Type | PSC |
GPM of Water @ 9 Ft. of Head | 18.5 |
Impeller Material | Polypropylene |
Design | Centrifugal |
Full Load Amps | 2.4 |
GPM of Water @ 3 Ft. of Head | 19.5 |
Motor Enclosure | TEFC |
Max. Specific Gravity | 1.2 |
GPM of Water @ 24 Ft. of Head | 12.5 |
GPM of Water @ 6 Ft. of Head | 19.5 |
Max. Viscosity | 50 CPS |
Series | DB5 |
Gasket Material | Fluoroelastomer |
GPM of Water @ 18 Ft. of Head | 14.5 |
Mounting | Close Coupled |
GPM of Water @ 15 Ft. of Head | 16 |
Bearing Type | Thrust & Radial |
Discharge Pipe Type | MNPT |
Discharge Port | 1/2 in MNPT |
Flow Rate @ 3 ft of Head (Maximum) | 19.5 gpm |
Intake Pipe Type | FNPT |
Phase | Single |
Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 9 ft of Head (Maximum) | 18.5 gpm |
Media Temperature (Maximum) | 180 Degrees F |
Feet of Head (Maximum) | 35.2 ft |
Full Load Current | 2.4 A |
Flow Rate @ 40 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 6 ft of Head (Maximum) | 19.5 gpm |
Mounting Orientation | Horizontal |
Motor Speed (Maximum) | 3,450 RPM |
Viscosity (Maximum) | 50 cps |
Flow Rate @ 15 ft of Head (Maximum) | 16 gpm |
Nameplate Voltage | 115V AC |
Specific Gravity (Maximum) | 1.8 |
Motor Mounting Type | Horizontal |
Suction Port | 1 in FNPT |
Priming | Manual |
Flow Rate @ 18 ft of Head (Maximum) | 14.5 gpm |
Operating Pressure (Maximum) | 14.2 psi |
Flow Rate @ 24 ft of Head (Maximum) | 12.5 gpm |
Chemical Compatibility | Deionized Water |
Horsepower (Maximum) | 1/4 hp |