Diamond Coring Rig, 120VAC, 19.3A, 6"
by HUSQVARNA
Original price
$3,024.99
-
Original price
$3,024.99
Original price
$3,024.99
$3,024.99
-
$3,024.99
Current price
$3,024.99
| Item | Diamond Coring Rig |
| Motor HP | 2 9/10 hp |
| Amps | 19.3 A |
| No Load RPM | 390/890 |
| Core Bit Cap Concrete | 10 in |
| Corded/Cordless | Corded |
| Corded/Banded | Corded |
| Voltage | 120V AC |
| Includes | Vacuum Plate |
| Features | Electronic Overload Protection, NEMA L5 20 Amp Plug, Twin Gear Carriage, Two Speed Drill Motor, V-Groove Roller Carriage |
| Tool Weight | 51.0 lb |
| Application | Core Drilling in Walls, Floors and Roofs Up to 250 mm Diameter |
| Standards | EN 12348:2000 |
| Series | DMS |
| Adjustable Angle | Yes |
| Nominal Voltage | 115V AC |
| Water Inlet Port | Yes |
| Current | 10 A |
| Maximum Spindle Speed | 890 RPM |
| Speed Setting | Variable Speed |
| Anti-Kickback Clutch Type | Mechanical |
| Coring Capacity in Concrete | 10 in |
| Number of Speed Settings | 2 |
| Spindle Travel | 27 in |
| Maximum Core Bit Compatibility | 10 in |
| Minimum Spindle Speed | 390 RPM |
| Overload Protection Clutch | Yes |
| Maximum Speed | 890 RPM |
| Phase | Single-Phase |
| Power Source | Corded |
| Horsepower | 2.9 hp |
| Angle-to-Surface | 60 Degrees |
| Number of Pieces | 2 |
| Core Drill Type | Core Drill Rig |