Cast Iron 1 HP Centrifugal Pump 115/230V
Original price
$1,489.99
-
Original price
$1,489.99
Original price
$1,489.99
$1,489.99
-
$1,489.99
Current price
$1,489.99
| HP - Pumps | 1 hp |
| Voltage - Pumps | 120/240V AC |
| Phase - Pumps | 1 |
| Housing Material - Pumps | Cast Iron |
| Max. Head | 83 ft |
| Max. Pressure - Pumps | 125 psi |
| Motor Enclosure - Pumps | Totally Enclosed Fan-Cooled |
| GPM of Water @ 30 Ft. of Head | 50 |
| Impeller Type | Closed |
| Best Efficiency Range GPM @ Head | 20 to 42 gpm @ 75 to 50 ft |
| Motor RPM | 3,500 RPM |
| Max. Liquid Temp. | 212 Degrees F |
| Voltage | 115/230VAC |
| Item | Centrifugal Pump |
| Phase | Single |
| Max. GPM @ Head | 50 @ 30 ft |
| Housing Material | Cast iron |
| Min. GPM @ Head | 10 @ 80 ft |
| GPM of Water @ 40 Ft. of Head | 47 |
| Frame | 56J |
| Item - Straight Centrifugal Pumps | Straight Centrifugal High Head Pump |
| Impeller Material | Bronze |
| Port Rotation | 45 increments |
| Max. Specific Gravity | 1.0 |
| Hz | 60 |
| HP | 1 |
| GPM of Water @ 80 Ft. of Head | 10 |
| Best Efficiency GPM @ Head | 32 @ 65 ft |
| Duty | Continuous |
| Outlet | 1" NPT |
| Amps | 15/8.3-7.5 |
| Motor Enclosure | Totally Enclosed Fan Cooled (TEFC) |
| Motor Type | Capacitor-Start |
| Inlet | 1-1/4" NPT |
| Max. Case Pressure | 125 psi |
| Inlet Pressure | 55 psi |
| Seal Material | 316 Stainless Steel, Buna Elastomer, Carbon, Ceramic |
| GPM of Water @ 70 Ft. of Head | 27 |
| GPM of Water @ 60 Ft. of Head | 36 |
| GPM of Water @ 50 Ft. of Head | 42 |
| Wetted Materials | 303 Stainless Steel, Carbon, Cast Iron, Bronze, Ceramic, Buna-N |
| Max. Pressure | 125 psi |
| Bearing Type | Ball |
| Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
| Pump Housing Material | Cast Iron |
| Compatible with Media Type | Water |
| Maximum RPM | 3,500 RPM |
| Flow Rate @ 20 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 90 ft of Head (Maximum) | Not Applicable |
| Best Efficiency Head | 65 ft |
| Duty Cycle | Continuous |
| Priming | Manual |
| Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 140 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
| Seal Type | Mechanical |
| Maximum Flow Rate | 50 gpm |
| Discharge Type | NPT |
| Shut Off Pressure (Maximum) | 125 psi |
| Maximum Feet of Head | 85 ft |
| Motor Frame Designation | 56J |
| Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 10 ft of Head (Maximum) | Not Applicable |
| Mounting Orientation | Horizontal, Vertical |
| Impeller Design | Closed |
| Flow Rate @ 50 ft of Head (Maximum) | 42 gpm |
| Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
| Motor Enclosure Type | TEFC |
| Flow Rate @ 70 ft of Head (Maximum) | 27 gpm |
| Frequency | 60 Hz |
| Intake Type | NPT |
| Series | 3642 |
| Wetted Material | 316 Stainless Steel, Bronze, Buna-N, Carbon, Ceramic |
| Flow Rate @ 60 ft of Head (Maximum) | 36 gpm |
| Flow Rate @ 120 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
| For Use With Potable Systems | Yes |
| Specific Gravity (Maximum) | 1 |
| Shaft Material | Stainless Steel |
| Discharge Rotation | 45 Degrees Increments |
| Flow Rate @ 40 ft of Head (Maximum) | 47 gpm |
| Minimum Flow Rate | 24 gpm |
| Nameplate Voltage | 115/230V AC |
| Horsepower | 1 hp |
| Maximum Media Temperature | 212 Degrees F |
| Best Efficiency Flow | 32 gpm |
| Flow Rate @ 30 ft of Head (Maximum) | 50 gpm |
| Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 80 ft of Head (Maximum) | 10 gpm |
| Flow Rate @ 15 ft of Head (Maximum) | Not Applicable |
| Pumping Application | Booster Service, Jockey Pump Service, Liquid Transfer, Spraying Systems, Water Circulation |
| Nominal Voltage | 115/230V AC |
| Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
| Features | Compact Design, Frame-Mounted Design |