Skip to content

1/25 HP Polypropylene Magnetic Drive Pump 115V 1/2" FPT

Original price $311.24 - Original price $311.24
Original price
$311.24
$311.24 - $311.24
Current price $311.24
Item Magnetic Drive Pump
HP 1/25 hp
Voltage 115
Inlet 1/2 in FPT
Outlet 1/2 in MPT
Max. Head 14.6 ft
Operating Pressure 6.3 psi
Housing Material Polypropylene
Temp. @ 30 psig 85 Degrees F
Full Load Amps 1.43
GPM of Water @ 6 Ft. of Head 6.8
Temp. @ 20 psig 140 Degrees F
GPM of Water @ 9 Ft. of Head 5.5
Design Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level
Mounting Horizontal
Application For Mild Chemicals at Moderate Temperature, Eliminates Seal-caused Friction Loss, Wear, Contamination and Leakage
Temp. @ 0 psig 150 Degrees F
Temp. @ 10 psig 140 Degrees F
Impeller Material Polypropylene
Motor Enclosure OPFC
Bearing Type Thrust
Max. Viscosity 100 SSU
Max. Specific Gravity 1.1
Gasket Material Buna-N
Cord Type 3-conductor SJP
GPM of Water @ 3 Ft. of Head 7.7
Series MD-SC
Flow Rate @ 40 ft of Head (Maximum) Not Applicable
Feet of Head (Maximum) 14.6 ft
Flow Rate @ 9 ft of Head (Maximum) 5.5 gpm
Frequency 60 Hz
Intake Pipe Type FNPT
Specific Gravity (Maximum) 1.1
Operating Pressure (Maximum) 6.3 psi
Motor Mounting Type Horizontal
Phase Single
Discharge Pipe Type NPT
Discharge Port 1/2 in NPT
Horsepower (Maximum) 1/25 hp
Flow Rate @ 18 ft of Head (Maximum) Not Applicable
Full Load Current 1.43 A
Nameplate Voltage 115V AC
Suction Port 1/2 in FNPT
Flow Rate @ 6 ft of Head (Maximum) 6.8 gpm
Flow Rate @ 50 ft of Head (Maximum) Not Applicable
Flow Rate @ 15 ft of Head (Maximum) Not Applicable
Viscosity (Maximum) 100 SUS
Media Temperature (Maximum) 150 Degrees F
Flow Rate @ 24 ft of Head (Maximum) Not Applicable
Flow Rate @ 3 ft of Head (Maximum) 7.8 gpm
Ambient Temperature (Maximum) 77 Degrees F

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare