1/3 HP 115 VAC 60 Hz Drum Pump
Original price
$611.24
-
Original price
$611.24
Original price
$611.24
$611.24
-
$611.24
Current price
$611.24
| For Use With | Chemical Transfer |
| Housing Material | Polypropylene |
| Includes | Clamp, Hose, Motor, Pump |
| Motor Type | Universal AC |
| Voltage | 115VAC |
| Action Type | Piston |
| Max. Flow GPM | 17 gpm |
| Application | For Transferring Antifreeze Solvents, Thinners, Automotive Additives, industrial Chemicals, Oil Based Fluids and Other Non Corrosive Fluids |
| DEF Compatible | No |
| Max. GPM for Water | 17 |
| Adapter Type | Bung |
| Max. Liquid Temp. | 150 Degrees F |
| Item | Electric Operated Drum Pump |
| pH Range | 6 to 10 |
| Motor Enclosure | ODP |
| HP | 1/3 |
| Discharge Tubing Material | PVC |
| Phase | 1 |
| Agency Compliance | CSA |
| Hz | 60 |
| Wetted Materials | 316 Stainless Steel and PVC, FKM, Polypropylene, PTFE |
| Suction Tube Type | Intake Tube |
| Max. Head | 5 to 20 ft. |
| Self-Priming | Yes |
| RPM | 6000 to 13,000 |
| Max. GPM for Oil | 7 |
| Adapter Material | Polypropylene |
| Metered | No |
| Max. Viscosity | 300 cps |
| Standards | CSA Certified |
| Pump Body Material | Polypropylene |
| Seal Material | Fluoroelastomer |
| Type | Motor and Tube |
| Max. Pressure | 8 psi |
| GPM | 7 to 17 |
| Max. Temp. | 150 Degrees F |
| Noise Level | 74 db |
| Duty Cycle | Continuous |
| Suction Tube Material | Polypropylene |
| Not Recommended Chemicals | Acetic Acid (Glacial), Acetone, Ammonia (Liquids), Anhydrous Ammonia, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Cyclohexane, DEF, Diesel Fuel, E85, Ethyl (Ethanol), Ethyl Acetate, Formaldehyde, Formaldehyde 40%, Gasoline, Glycerin, Heptane, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrazine, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Isopropyl (Isopropanol), Kerosene, Lacquer Thinners, Methyl (Methanol), Methyl Ethyl Ketone (MEK), Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint Thinner, Sodium Hypochlorite/Bleach (to 20%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene |
| Includes Discharge Hose | Yes |
| Compatible Chemicals | Acetic Acid 20%, Acetic Acid 80%, Ammonium Hydroxide, Antifreeze (Coolant), Calcium Chloride, Citric Acid 50%, Deionized Water, Ethylene Glycol, Fertilizers, Formic Acid, Fresh Water, Fungicides, Herbicides, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%) |
| Series | EF |
| Discharge Tube Outlet OD | 1 in |
| Suction Tube ID | 1 1/4 in |
| Thermal Protection | No |
| Suction Tube OD | 1 1/4 in |
| Discharge Connection Type | Hose Barb |
| Frequency (Hz) | 60 |
| Max. Flow Rate | 17 gpm |
| Plug Type | NEMA 5-15 |
| Discharge Tube Outlet ID | 3/4 in |
| Food Grade | No |
| Motor HP | 1/3 hp |
| Includes Bung Adapter | No |
| Power Source | Electric |
| For Media Type | Acetic Acid, Ammonium Hydroxide, Antifreeze, Calcium Chloride, Citric Acid, Ethylene Glycol, Fertilizers, Formic Acid, Fungicides, Herbicides, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide, Water |
| Hose Tube Material | PVC |
| Max. Head - Pumps | 20 ft |
| Motor RPM | 8000 to 14,000 |
| For Container Type | Drum |
| Min. Fluid Temp. | 0 Degrees F |
| Housing Material - Pumps | Polypropylene |
| Full Load Amps | 2.0 |
| Diesel Exhaust Fluid Compatible | No |
| Runs Dry | No |
| Pump Connection Type | Smooth Bore |
| Max. Fluid Temp. | 150 Degrees F |
| Includes Suction Tube | Yes |
| Number of Phases | 1 |
| Variable Speed | Yes |
| Includes Nozzle | No |
| Max. Head Pressure | 8 psi |
| Explosion Proof | No |
| Grease | NT |
| Gear Lube | NT |
| Max. Outlet Pressure | 8 psi |
| Rated Voltage | 115V AC |