1/3 HP PP Magnetic Drive Pump 115/208-230V 1" FNPT
Original price
$1,307.49
-
Original price
$1,307.49
Original price
$1,307.49
$1,307.49
-
$1,307.49
Current price
$1,307.49
| Item | Magnetic Drive Pump |
| HP | 1/3 hp |
| Voltage | 115/208-230 |
| Inlet | 1 in FNPT |
| Outlet | 1 in MNPT |
| Max. Head | 33 ft |
| Operating Pressure | 14.2 psi |
| Housing Material | Polypropylene |
| Bearing Type | Thrust & Radial |
| Full Load Amps | 5.70/2.70-2.85 |
| Series | DB6 |
| Mounting | Horizontal |
| Max. Viscosity | 100 cps |
| GPM of Water @ 6 Ft. of Head | 39 |
| GPM of Water @ 18 Ft. of Head | 31 |
| Motor Type | Induction |
| Impeller Material | Polypropylene |
| Design | Centrifugal |
| Max. Specific Gravity | 1.2 |
| Motor Enclosure | TEFC |
| GPM of Water @ 9 Ft. of Head | 37 |
| GPM of Water @ 15 Ft. of Head | 34 |
| Gasket Material | Viton |
| GPM of Water @ 3 Ft. of Head | 39 |
| Application | Acids, Caustics, DI-Water, Plating Solutions |
| GPM of Water @ 24 Ft. of Head | 23 |
| Media Temperature (Maximum) | 180 Degrees F |
| Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
| Specific Gravity (Maximum) | 1.8 |
| Discharge Pipe Type | MNPT |
| Flow Rate @ 3 ft of Head (Maximum) | 39 gpm |
| Nameplate Voltage | 115/208-230V AC |
| Flow Rate @ 18 ft of Head (Maximum) | 31 gpm |
| Intake Pipe Type | FNPT |
| Motor Mounting Type | Horizontal |
| Chemical Compatibility | Deionized Water |
| Operating Pressure (Maximum) | 14.2 psi |
| Mounting Orientation | Horizontal |
| Flow Rate @ 40 ft of Head (Maximum) | Not Applicable |
| Discharge Port | 1 in MNPT |
| Phase | Single |
| Motor Speed (Maximum) | 3,450 RPM |
| Suction Port | 1 in FNPT |
| Flow Rate @ 6 ft of Head (Maximum) | 39 gpm |
| Priming | Manual |
| Viscosity (Maximum) | 100 cps |
| Flow Rate @ 15 ft of Head (Maximum) | 34 gpm |
| Horsepower (Maximum) | 1/3 hp |
| Flow Rate @ 9 ft of Head (Maximum) | 37 gpm |
| Flow Rate @ 24 ft of Head (Maximum) | 23 gpm |
| Feet of Head (Maximum) | 33 ft |
| Full Load Current | 5.7/2.7-2.85 A |