1/3 HP PPS Magnetic Drive Pump 115/230V 1" FPT
Original price
$1,057.49
-
Original price
$1,057.49
Original price
$1,057.49
$1,057.49
-
$1,057.49
Current price
$1,057.49
| Item | Magnetic Drive Pump |
| HP | 1/3 hp |
| Voltage | 115/230 |
| Inlet | 1 in FPT |
| Outlet | 3/4 in MPT |
| Max. Head | 40.5 ft |
| Operating Pressure | 18.0 psi |
| Housing Material | PPS |
| Design | Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level |
| Temp. @ 30 psig | 165 Degrees F |
| Full Load Amps | 5.00/2.50 |
| Max. Viscosity | 100 SSU |
| GPM of Water @ 6 Ft. of Head | 31.8 |
| Mounting | Horizontal |
| Temp. @ 10 psig | 175 Degrees F |
| GPM of Water @ 18 Ft. of Head | 26.8 |
| Motor Type | PSC |
| Bearing Type | Thrust |
| Motor Enclosure | TEFC |
| Impeller Material | PPS |
| GPM of Water @ 40 Ft. of Head | 6.4 |
| Gasket Material | FKM |
| GPM of Water @ 24 Ft. of Head | 23.9 |
| GPM of Water @ 15 Ft. of Head | 28.1 |
| Series | MD-HC |
| Temp. @ 20 psig | 170 Degrees F |
| GPM of Water @ 9 Ft. of Head | 30.5 |
| Max. Specific Gravity | 1.1 |
| Temp. @ 0 psig | 180 Degrees F |
| Application | For Highly Corrosive Chemicals, Eliminates Seal-caused Friction Loss, Wear, Contamination and Leakage |
| Operating Pressure (Maximum) | 18 psi |
| Flow Rate @ 6 ft of Head (Maximum) | 31.8 gpm |
| Feet of Head (Maximum) | 40.5 ft |
| Full Load Current | 5 A |
| Media Temperature (Maximum) | 180 Degrees F |
| Phase | Single |
| Frequency | 60 Hz |
| Flow Rate @ 40 ft of Head (Maximum) | 6 gpm |
| Suction Port | 1 in FNPT |
| Viscosity (Maximum) | 100 SUS |
| Intake Pipe Type | FNPT |
| Specific Gravity (Maximum) | 1.1 |
| Flow Rate @ 9 ft of Head (Maximum) | 30.5 gpm |
| Horsepower (Maximum) | 1/3 hp |
| Nameplate Voltage | 115/230V AC |
| Flow Rate @ 18 ft of Head (Maximum) | 25 gpm |
| Ambient Temperature (Maximum) | 77 Degrees F |
| Motor Mounting Type | Horizontal |
| Flow Rate @ 15 ft of Head (Maximum) | 28.1 gpm |
| Discharge Port | 3/4 in NPT |
| Flow Rate @ 3 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 24 ft of Head (Maximum) | 23.9 gpm |
| Discharge Pipe Type | NPT |