Drums Cart System, 115VAC, Electric AC
Original price
$2,091.24
-
Original price
$2,091.24
Original price
$2,091.24
$2,091.24
-
$2,091.24
Current price
$2,091.24
| For Use With | Anti-Freeze, Clean Water, Diesel Exhaust Fluid |
| Housing Material | Polypropylene / EPDM |
| Includes | 2600 lb Load Rating Heavy Duty Cart, 3/4 in x 12 ft Discharge Hose, Digital Turbine Meter, SS Automatic Nozzle |
| Motor Type | 2 Pole |
| Voltage | 115VAC |
| Application | Diesel Exhaust Fluid, Anti-Freeze, Clean Water |
| Max. Liquid Temp. | 104 Degrees F |
| Pump Body Material | Polypropylene, EPDM |
| Gasket Material | EPDM |
| Max. Temp. | 104 Degrees F |
| Hz | 60 |
| Max. Head | 48 ft. |
| Max. GPM for Water | 8 |
| Max. Pressure | 23 psi |
| Metered | Yes |
| Seal Material | EPDM |
| Phase | 1 |
| pH Range | 9.8 to 10 |
| HP | 1/10 |
| Wetted Materials | EPDM, Polypropylene, Stainless Steel |
| Agency Compliance | ISO |
| Hose Material | Peroxide Cured EPDM |
| Motor Enclosure | IP55 |
| Item | Electric Operated Drum Pump |
| Standards | CE, IP 55, ISO 22241 |
| RPM | 1730 |
| Max. Viscosity | 10 cps |
| DEF Compatible | Yes |
| GPM | 8 |
| Includes Spout | Yes |
| Includes Bung Adapter | No |
| Diesel Exhaust Fluid Compatible | Yes |
| Nozzle Material | Stainless Steel |
| Frequency (Hz) | 60 |
| Discharge Connection Type | Hose Barb |
| Duty Cycle | Intermittent |
| For Media Type | Acetic Acid, Ammonium Hydroxide, Antifreeze, Bleach, Citric Acid, DEF, Ethanol, Ethylene Glycol, Formaldehyde, Glycerin, Isopropanol, Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfite, Water |
| Hose Cover Material | Thermal Plastic |
| Max. Oil Flow | 8 gpm |
| Min. Fluid Temp. | 17 Degrees F |
| Suction Tube OD | 1 in |
| Pump Connection Type | Hose Barb |
| Discharge Tube Outlet ID | 3/4 in |
| For Container Type | Drum, Tote |
| Noise Level | 70 db |
| Variable Speed | No |
| Not Recommended Chemicals | Acetic Acid (Glacial), Acetic Acid 80%, Acetone, Ammonia (Liquids), Anhydrous Ammonia, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Cyclohexane, Diesel Fuel, E85, Ethyl Acetate, Fertilizers, Formic Acid, Fungicides, Gasoline, Heptane, Herbicides, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrazine, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Kerosene, Lacquer Thinners, Lithium Grease, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Motor Oil, Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint, Paint Thinner, Pesticides, Phosphoric Acid (40% Solution), Sodium Bisulfate, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene |
| Includes Suction Tube | Yes |
| Runs Dry | Yes |
| Max. Head Pressure | 23 psi |
| Includes Nozzle | Yes |
| Max. Head - Pumps | 48 ft |
| Housing Material - Pumps | Polypropylene |
| Motor RPM | 1,750 RPM |
| Hose Tube Material | EPDM |
| Discharge Tube Outlet OD | 1 in |
| Suction Tube Material | EPDM |
| Full Load Amps | 4.5 |
| Compatible Chemicals | Acetic Acid 20%, Ammonium Hydroxide, Antifreeze (Coolant), Citric Acid 50%, DEF, Deionized Water, Ethyl (Ethanol), Ethylene Glycol, Formaldehyde, Formaldehyde 40%, Fresh Water, Glycerin, Isopropyl (Isopropanol), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfite, Sodium Hypochlorite/Bleach (to 20%) |
| Max. Flow Rate | 8 gpm |
| Power Source | Electric |
| Includes Discharge Hose | Yes |
| Max. Fluid Temp. | 104 Degrees F |
| Suction Tube ID | 3/4 in |
| Nozzle Operation | Automatic |
| Spout Material | 316 Stainless Steel |
| Motor HP | 1/10 hp |
| Spout Connection Type | Integral to Nozzle |
| Self-Priming | Yes |
| Number of Phases | 1 |
| Pump Connection OD | 1 in |
| Food Grade | No |
| Rated Voltage | 115V AC |
| Explosion Proof | No |
| Max. Outlet Pressure | 23 psi |
| Grease | NT |
| Gear Lube | NT |