Multi-Stage Booster Pump, 1/2 hp, 120/240V AC, 1 Phase, 1 in NPT Inlet Size, 9 Stage
Original price
$1,862.88
-
Original price
$1,862.88
Original price
$1,862.88
$1,862.88
-
$1,862.88
Current price
$1,862.88
Booster Pump Type | Multi-Stage Booster Pump |
Item | Multi-Stage Booster Pump |
HP - Pumps | 1/2 hp |
Voltage - Pumps | 120/240V AC |
Phase - Pumps | 1 |
Number of Stages - Pumps | 9 |
Max. Pressure - Pumps | 159 psi |
Housing Material - Pumps | Stainless Steel |
Motor Enclosure - Pumps | Open Dripproof |
Frame | 48Y |
Max. Liquid Temp. | 120 Degrees F |
Impeller Material | Celcon |
Max. PSI Boost @ 2-10 GPM | 150 psi @ 2 gpm |
Bearing Type | Ball |
Duty | Continuous |
Motor Type | Capacitor-Start |
Inlet | 1" FNPT |
Voltage | 115/230 |
Agency Compliance | cCSAus |
Stages | 9 |
HP | 1/2 |
Housing Material | Stainless Steel |
Max. Case Pressure | 375 psi |
GPM @ 80 PSI | 7.5 |
Best Efficiency GPM @ PSI | 5 @ 123 |
Hz | 60 |
Motor Enclosure | ODP |
Outlet | 1" FNPT |
Max. Pressure | 159 psi |
Motor RPM | 3,450 RPM |
Wetted Materials | Carbon, Cast Iron, Ceramic, Engineered Composite, Stainless Steel, Viton |
Seal Material | Stainless Steel, Viton and Carbon/Ceramic |
Pump Mounting Position | Horizontal |
Impeller Type | Closed |
Motor Ambient Temp. Rating | 40 Degrees C |
Includes | Manual |
Phase | 1 |
Amps | 9.0/4.5 |
Suction Lift | 10 ft |
Motor Enclosure Type | ODP |
Nominal Voltage | 115/230V AC |
Discharge Type | NPT |
Series | BT4 |
Case Pressure (Maximum) | 375 psi |
For Use With Systems | Potable |
Duty Cycle | Continuous |
Horsepower | 1/2 hp |
Flow Rate @ 160 psi | Not Applicable |
Mounting Orientation | Horizontal |
Best Efficiency Pressure | 123 psi |
Flow Rate @ 20 psi | Not Applicable |
Flow Rate @ 50 psi | Not Applicable |
Maximum RPM | 3,450 RPM |
Flow Rate @ 100 psi | 6.5 gpm |
Priming | Manual |
Flow Rate @ 120 psi | 5 gpm |
Frequency | 60 Hz |
Motor Frame Designation | 48Y |
Motor Ambient Temperature (Maximum) | 104 Degrees F |
Shut Off Pressure (Maximum) | 160 psi |
Standards | cCSAus Listed |
Maximum Media Temperature | 120 Degrees F |
Pump Housing Material | Stainless Steel |
Maximum Flow Rate | 5 gpm |
Maximum Feet of Head | 370 ft of head |
Number of Stages | 9 |
Nameplate Voltage | 115/230V AC |
Suction Lift (Maximum) | 10 ft |
For Use With Potable Systems | Yes |
Motor Ambient Temperature (Minimum) | 40 Degrees F |
Wetted Material | Carbon, Cast Iron, Ceramic, Stainless Steel, Viton |
Intake Type | NPT |
Flow Rate @ 140 psi | 3 gpm |
Thermal Overload Protection | Yes |
Flow Rate @ 40 psi | Not Applicable |
Flow Rate @ 200 psi | Not Applicable |
Flow Rate @ 30 psi | Not Applicable |
Impeller Design | Closed |
Flow Rate @ 180 psi | Not Applicable |
Flow Rate @ 60 psi | Not Applicable |
Flow Rate @ 80 psi | Not Applicable |
Pressure Boost (Maximum) | 150 psi |
Compatible with Media Type | Water |
Pumping Application | Boosting Water Pressure from City Mains or Private Water Systems, Evaporative Cooling System Misters Water Circulation, Filtration, General Purpose Plumbing, Lawn and Crop Irrigation, Poultry Houses, Pressure Washing Buildings and Floors, Reverse Osmosis, Spray Cooling Equipment |
Feet of Head (Minimum) | 180 ft of head |