Skip to content

Cutting and Shaping Tools

88 products

Filters

  • $7.54 - $7.54
    $7.54
    $18.71
    $18.71 - $18.71
    $18.71

    Arch Punch, 5/8 in. Tip, 1-5/64 in. L

    GENERAL TOOLS
    In stock

    Mfr #: 1271G The General Tools and Instruments 1271G Arch Punch is the ideal punch tool for punching a 5/8 inch hole The punch works on leather, r...

    View full details
    $7.54 - $7.54
    $7.54
    $18.71
    $18.71 - $18.71
    $18.71
  • $20.30 - $20.30
    $20.30
    $41.27
    $41.27 - $41.27
    $41.27

    Predalite, Palm Coated, XL, PK12

    MCR SAFETY
    In stock

    Mfr # 9780XL Item Coated Gloves Glove Construction Seamless Knit Base Coating Material ...

    View full details
    $20.30 - $20.30
    $20.30
    $41.27
    $41.27 - $41.27
    $41.27
  • $17.98 - $17.98
    $17.98
    $39.23
    $39.23 - $39.23
    $39.23

    Center Punch Set, Not Tether Capable

    MAYHEW
    In stock

    MAYHEW Cutting and Shaping Tool In the Cutting and Shaping Tools category, this cutting and shaping tool supports consistent performance for routin...

    View full details
    $17.98 - $17.98
    $17.98
    $39.23
    $39.23 - $39.23
    $39.23
  • $9.28 - $9.28
    $9.28
    $23.94
    $23.94 - $23.94
    $23.94

    Guarded Cold Chisel, 1" Tip x 12" L

    DASCO PRO
    In stock

    Mfr # G419 Item Cold Chisel Type Guarded Tether Capable Tether Capable ...

    View full details
    $9.28 - $9.28
    $9.28
    $23.94
    $23.94 - $23.94
    $23.94
  • $5.22 - $5.22
    $5.22
    $11.63
    $11.63 - $11.63
    $11.63

    Finishing Block Kit, 5-1/4inL x 3inW, PK7

    FINISH 1ST
    In stock

    Mfr # 8352035 Attachment Type Adhesive For Use With Sandpaper Material Aluminum oxi...

    View full details
    $5.22 - $5.22
    $5.22
    $11.63
    $11.63 - $11.63
    $11.63
  • $22.62 - $22.62
    $22.62
    $50.15
    $50.15 - $50.15
    $50.15

    Solid Punch Set, Not Tether Capable

    MAYHEW
    In stock

    Mfr #: 61340 Price For: Each Standards: ASME Item: Solid Punch Set Punch Piece Design: 1-Piece Design Sizes Included: 3/32, 1/8, 5/32, 3/16, 1/4,...

    View full details
    $22.62 - $22.62
    $22.62
    $50.15
    $50.15 - $50.15
    $50.15
  • $29.58 - $29.58
    $29.58
    $68.99
    $68.99 - $68.99
    $68.99

    Drive Pin Punch Set, 10 Pieces, Steel

    MAYHEW
    In stock

    MAYHEW Cutting and Shaping Tool Categorized under Cutting and Shaping Tools, this cutting and shaping tool is selected for practical installation a...

    View full details
    $29.58 - $29.58
    $29.58
    $68.99
    $68.99 - $68.99
    $68.99
  • $38.28 - $38.28
    $38.28
    $82.19
    $82.19 - $82.19
    $82.19

    Brass Drift Punch Set, 5pcs

    MAYHEW
    In stock

    Mfr #: 67003 Made in the USA Non-Marring/Non-Sparking, Will Not Damage Harder Steel Materials includes 1/4 x 4, 3/8 x 6, 1/2 x 7, 5/8 x 8 and 3/4 ...

    View full details
    $38.28 - $38.28
    $38.28
    $82.19
    $82.19 - $82.19
    $82.19
  • $3.48 - $3.48
    $3.48
    $6.95
    $6.95 - $6.95
    $6.95

    Nail Set, 2/32" Tip x 4" L, Black Oxide

    DASCO PRO
    In stock

    Mfr #: 697 Price For: Each Material: Heat Treated High Carbon Steel Overall Length (In.): 4 Item: Nail Set Number of Pieces: 1 Finish: black oxid...

    View full details
    $3.48 - $3.48
    $3.48
    $6.95
    $6.95 - $6.95
    $6.95
  • $9.28 - $9.28
    $9.28
    $20.63
    $20.63 - $20.63
    $20.63

    Arch Punch, 3/4 in. Tip, 1-1/4 in. L

    GENERAL TOOLS
    In stock

    Mfr #: 1271I The General Tools and Instruments 1271I Arch Punch is the ideal punch tool for punching a 3/4 inch hole The punch works on leather, r...

    View full details
    $9.28 - $9.28
    $9.28
    $20.63
    $20.63 - $20.63
    $20.63
  • $243.60 - $243.60
    $243.60
    $517.19
    $517.19 - $517.19
    $517.19

    Gasket Cutter Kit, Heavy Duty, 27Pcs.

    ALLPAX
    In stock

    Mfr #: AX6010 Brass cutter block with contoured edges to minimize gasket material buckling and assure precision cuts Heavy-duty blades ensures pre...

    View full details
    $243.60 - $243.60
    $243.60
    $517.19
    $517.19 - $517.19
    $517.19
  • $20.88 - $20.88
    $20.88
    $43.38
    $43.38 - $43.38
    $43.38

    Predalite, Palm Coated, S, PK12

    MCR SAFETY
    In stock

    Mfr # 9780S Item Coated Gloves Glove Construction Seamless Knit Glove Materials Pol...

    View full details
    $20.88 - $20.88
    $20.88
    $43.38
    $43.38 - $43.38
    $43.38
  • $3.48 - $3.48
    $3.48
    $6.35
    $6.35 - $6.35
    $6.35

    Pin Punch, 1/16 Tip x 4-1/2" L

    DASCO PRO
    In stock

    DASCO PRO Cutting and Shaping Tool This cutting and shaping tool belongs to the Cutting and Shaping Tools category and is built for dependable day-...

    View full details
    $3.48 - $3.48
    $3.48
    $6.35
    $6.35 - $6.35
    $6.35
  • $5.22 - $5.22
    $5.22
    $9.78
    $9.78 - $9.78
    $9.78

    Hand Sanding Block, 5 In L

    KEYSCO TOOLS
    In stock

    KEYSCO TOOLS Cutting and Shaping Tool Categorized under Cutting and Shaping Tools, this cutting and shaping tool is selected for practical installa...

    View full details
    $5.22 - $5.22
    $5.22
    $9.78
    $9.78 - $9.78
    $9.78
  • $35.96 - $35.96
    $35.96
    $77.15
    $77.15 - $77.15
    $77.15

    Pilot Punch Set, Not Tether Capable

    MAYHEW
    In stock

    MAYHEW Cutting and Shaping Tool In the Cutting and Shaping Tools category, this cutting and shaping tool supports consistent performance for routin...

    View full details
    $35.96 - $35.96
    $35.96
    $77.15
    $77.15 - $77.15
    $77.15
  • $13.92 - $13.92
    $13.92
    $29.96
    $29.96 - $29.96
    $29.96

    12 in. High Tension Hacksaw

    MILWAUKEE TOOL
    In stock

    Mfr #: 48-22-0050 Measures 12” Reinforced metal frame for increased strength High leverage tension knob makes it extremely easy to reach higher te...

    View full details
    $13.92 - $13.92
    $13.92
    $29.96
    $29.96 - $29.96
    $29.96
  • $5.22 - $5.22
    $5.22
    $11.70
    $11.70 - $11.70
    $11.70

    Pin Punch, Black, 1/8 in Tip, 5/16 x 8 in

    MAYHEW
    In stock

    Mfr # 21500 Item Pin Punch Hex (In.) 5/16 in Tether Capable Tether Capable ...

    View full details
    $5.22 - $5.22
    $5.22
    $11.70
    $11.70 - $11.70
    $11.70
  • $196.62 - $196.62
    $196.62
    $406.79
    $406.79 - $406.79
    $406.79

    Pipe and Tube Notcher, Hole Saw, 40 ga.

    WOODWARD FAB
    In stock

    WOODWARD FAB Cutting and Shaping Tool This cutting and shaping tool belongs to the Cutting and Shaping Tools category and is built for dependable d...

    View full details
    $196.62 - $196.62
    $196.62
    $406.79
    $406.79 - $406.79
    $406.79
  • $117.74 - $117.74
    $117.74
    $236.39
    $236.39 - $236.39
    $236.39

    Punch and Chisel Set, 24 Pieces

    MAYHEW PRO
    In stock

    MAYHEW PRO Cutting and Shaping Tool Categorized under Cutting and Shaping Tools, this cutting and shaping tool is selected for practical installati...

    View full details
    $117.74 - $117.74
    $117.74
    $236.39
    $236.39 - $236.39
    $236.39
  • $15.66 - $15.66
    $15.66
    $34.43
    $34.43 - $34.43
    $34.43

    Needle File, Swiss, Half Round, 5-1/2 In. L

    STRAUSS
    In stock

    STRAUSS Cutting and Shaping Tool In the Cutting and Shaping Tools category, this cutting and shaping tool supports consistent performance for routi...

    View full details
    $15.66 - $15.66
    $15.66
    $34.43
    $34.43 - $34.43
    $34.43
  • $6.38 - $6.38
    $6.38
    $14.36
    $14.36 - $14.36
    $14.36

    Rasping Jab Saw

    MILWAUKEE TOOL
    In stock

    MILWAUKEE TOOL Cutting and Shaping Tool This cutting and shaping tool belongs to the Cutting and Shaping Tools category and is built for dependable...

    View full details
    $6.38 - $6.38
    $6.38
    $14.36
    $14.36 - $14.36
    $14.36
  • $4.64 - $4.64
    $4.64
    $11.39
    $11.39 - $11.39
    $11.39

    Pilot Punch, Black, 3mm Tip, 1/4 x 4 in

    MAYHEW
    In stock

    MAYHEW Cutting and Shaping Tool This cutting and shaping tool belongs to the Cutting and Shaping Tools category and is built for dependable day-to-...

    View full details
    $4.64 - $4.64
    $4.64
    $11.39
    $11.39 - $11.39
    $11.39
  • $8.12 - $8.12
    $8.12
    $21.18
    $21.18 - $21.18
    $21.18

    Guarded Brick Chisel, 4" Tip x 7" L

    DASCO PRO
    In stock

    Mfr # G437 Item Brick Chisel Type Guarded Tether Capable Tether Capable ...

    View full details
    $8.12 - $8.12
    $8.12
    $21.18
    $21.18 - $21.18
    $21.18
  • $4.64 - $4.64
    $4.64
    $9.83
    $9.83 - $9.83
    $9.83

    Drift Punch, 1/8 Tip x 8" L

    DASCO PRO
    In stock

    Mfr #: 601 Price For: Each Tether Capable: Standard Tool (Accessory Needed for Tethering) Design: 1-piece Item: Drift Punch Application: Long Tap...

    View full details
    $4.64 - $4.64
    $4.64
    $9.83
    $9.83 - $9.83
    $9.83

About Cutting and Shaping Tools

Cutting and Shaping Tools products for tools & machining projects, contractor purchasing, and facility maintenance.

This collection brings together cutting and shaping tools and related supplies to help buyers move from a broad category into specific products with less guesswork. It is designed for contractors, maintenance teams, facility buyers, and service crews who need practical product information, clear internal links, and easy access to relevant items.

What you can find in this collection

  • Cutting and shaping tools and related supplies
  • Product options commonly used in tools & machining projects, contractor purchasing, and facility maintenance
  • Examples such as Guarded Brick Chisel, 4" Tip x 7" L, Center Punch, 5/16 Tip x4-1/2" L, and Drive Pin Punch Set, Not Tether Capable
  • 87 product listings organized under this category

How to choose the right products

  • Start with the job application, then compare size, material, rating, finish, compatibility, and package quantity.
  • For replacement or repair work, check the product title, specifications, dimensions, and manufacturer part number before ordering.
  • Use the linked product examples to move from this category page into specific product pages with more detailed information.

Common applications

  • Commercial and industrial maintenance
  • Contractor jobsite purchasing
  • Facility repair and replacement work
  • Shop, warehouse, and service-team replenishment

Product examples

These internal links point to canonical product pages, helping customers and search engines move from this collection hub into relevant product detail pages.

The 12" Half Round Double Cut Smooth File - Boxed from Crescent Nicholson is a 12 in. half-round file with double-cut teeth on the flat side and single-cut teeth on the round side, part number 05158N. The Engraver Tool, 6 1/2 in L, 7200 spm, 115V, Includes Carbide Bit, Corded from Dremel is a corded 115V electric engraver with a stroke adjustment dial, a soft grip and a carbide engraving tip.

Frequently asked questions

How do I compare cutting and shaping tools products?

Compare the application, size, material, rating, compatibility, manufacturer part number, and package quantity. For fitted or replacement parts, verify dimensions and specifications before ordering.

Why is this cutting and shaping tools collection useful?

A clear collection page helps buyers understand the category, find related product groups, and reach individual product pages faster. It also gives search engines better context for crawling and indexing related products.

Cutting and Shaping Tools collection image

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare