Multi-Stage Booster Pump, 2 hp, 120/240V AC, 1 Phase, 1 in NPT Inlet Size, 10 Stage
Original price
$2,104.99
-
Original price
$2,104.99
Original price
$2,104.99
$2,104.99
-
$2,104.99
Current price
$2,104.99
Item | Multi-Stage Booster Pump |
Booster Pump Type | Multi-Stage Booster Pump |
HP - Pumps | 2 hp |
Voltage - Pumps | 120/240V AC |
Phase - Pumps | 1 |
Number of Stages - Pumps | 10 |
Max. Pressure - Pumps | 158 psi |
Housing Material - Pumps | Stainless Steel |
Motor Enclosure - Pumps | Open Dripproof |
Hz | 60 |
GPM @ 80 PSI | 30 |
Inlet | 1" FNPT |
Max. PSI Boost @ 20 GPM | 128 |
Bearing Type | Ball |
Frame | 48Y |
Includes | Manual |
Max. PSI Boost @ 2-10 GPM | 155 psi @ 10 gpm |
Outlet | 1" FNPT |
Phase | 1 |
Impeller Type | Closed |
Max. Liquid Temp. | 120 Degrees F |
Motor Ambient Temp. Rating | 40 Degrees C |
Best Efficiency GPM @ PSI | 25 @ 107 |
Voltage | 115/230 |
Max. Case Pressure | 375 psi |
Pump Mounting Position | Horizontal |
Max. Pressure | 158 psi |
GPM @ 60 PSI | 33 |
Duty | Continuous |
Wetted Materials | Buna, Carbon, Cast Iron, Ceramic, Engineered Composite, Stainless Steel |
Seal Material | Buna, Phen/Ceramic, Stainless Steel |
Max. PSI Boost @ 30 GPM | 79 |
HP | 2 |
Suction Lift | 10 ft |
Stages | 10 |
Housing Material | Stainless Steel |
Agency Compliance | cCSAus |
Motor RPM | 3,450 RPM |
Impeller Material | Celcon |
Motor Type | Capacitor-Start |
Amps | 18/9 |
Motor Enclosure | ODP |
Case Pressure (Maximum) | 375 psi |
Frequency | 60 Hz |
Pumping Application | Boosting Water Pressure from City Mains or Private Water Systems, Evaporative Cooling System Misters Water Circulation, Filtration, General Purpose Plumbing, Lawn and Crop Irrigation, Poultry Houses, Pressure Washing Buildings and Floors, Reverse Osmosis, Spray Cooling Equipment |
Feet of Head (Minimum) | 70 ft of head |
Flow Rate @ 40 psi | 36 gpm |
Standards | cCSAus Listed |
Motor Frame Designation | 48Y |
Nameplate Voltage | 115/230V AC |
Number of Stages | 10 |
Nominal Voltage | 115/230V AC |
Motor Enclosure Type | ODP |
Duty Cycle | Continuous |
Maximum Flow Rate | 25 gpm |
Motor Ambient Temperature (Maximum) | 104 Degrees F |
Flow Rate @ 200 psi | Not Applicable |
Flow Rate @ 180 psi | Not Applicable |
For Use With Potable Systems | Yes |
Flow Rate @ 120 psi | 22 gpm |
Pressure Boost (Maximum) | 155 psi |
Series | BT4 |
Suction Lift (Maximum) | 10 ft |
For Use With Systems | Potable |
Intake Type | NPT |
Thermal Overload Protection | Yes |
Flow Rate @ 80 psi | 30 gpm |
Flow Rate @ 140 psi | 16 gpm |
Priming | Manual |
Pump Housing Material | Stainless Steel |
Best Efficiency Pressure | 107 psi |
Mounting Orientation | Horizontal |
Flow Rate @ 50 psi | 35 gpm |
Maximum Feet of Head | 370 ft of head |
Maximum RPM | 3,450 RPM |
Flow Rate @ 30 psi | 37.5 gpm |
Shut Off Pressure (Maximum) | 155 psi |
Horsepower | 2 hp |
Flow Rate @ 100 psi | 27 gpm |
Compatible with Media Type | Water |
Maximum Media Temperature | 120 Degrees F |
Impeller Design | Closed |
Flow Rate @ 20 psi | Not Applicable |
Motor Ambient Temperature (Minimum) | 40 Degrees F |
Wetted Material | Buna, Carbon, Cast Iron, Ceramic, Stainless Steel |
Flow Rate @ 60 psi | 34 gpm |
Discharge Type | NPT |
Flow Rate @ 160 psi | Not Applicable |