Multi-Stage Booster Pump, 3 hp, 208 to 240V AC, 1 Phase, 1 in NPT Inlet Size, 13 Stage
Original price
$2,789.99
-
Original price
$2,789.99
Original price
$2,789.99
$2,789.99
-
$2,789.99
Current price
$2,789.99
| Booster Pump Type | Multi-Stage Booster Pump |
| Item | Multi-Stage Booster Pump |
| HP - Pumps | 3 hp |
| Voltage - Pumps | 208 to 240V AC |
| Phase - Pumps | 1 |
| Number of Stages - Pumps | 13 |
| Max. Pressure - Pumps | 206 psi |
| Housing Material - Pumps | Stainless Steel |
| Motor Enclosure - Pumps | Open Dripproof |
| Voltage | 208/230 |
| Inlet | 1" FNPT |
| Outlet | 1" FNPT |
| Pump Mounting Position | Horizontal |
| Hz | 60 |
| Motor Ambient Temp. Rating | 40 Degrees C |
| Max. PSI Boost @ 20 GPM | 168 |
| Motor Type | Capacitor-Start |
| Seal Material | Stainless Steel, Viton and Carbon/Ceramic |
| Max. Pressure | 206 psi |
| Phase | 1 |
| Best Efficiency GPM @ PSI | 25 @ 142 |
| Suction Lift | 10 ft |
| Motor RPM | 3,450 RPM |
| Duty | Continuous |
| Agency Compliance | cCSAus |
| Motor Enclosure | ODP |
| Bearing Type | Ball |
| HP | 3 |
| Impeller Type | Closed |
| Housing Material | Stainless Steel |
| Frame | 56Y |
| Max. Liquid Temp. | 120 Degrees F |
| Max. PSI Boost @ 2-10 GPM | 200 psi @ 10 gpm |
| Impeller Material | Celcon |
| Wetted Materials | Buna, Carbon, Cast Iron, Ceramic, Engineered Composite, Stainless Steel |
| Stages | 13 |
| Max. Case Pressure | 375 psi |
| Amps | 13.7-11.4 |
| Max. PSI Boost @ 30 GPM | 107 |
| Includes | Manual |
| Motor Frame Designation | Y56Y |
| For Use With Systems | Potable |
| Flow Rate @ 200 psi | 10 gpm |
| Horsepower | 3 hp |
| Flow Rate @ 60 psi | 36 gpm |
| Flow Rate @ 40 psi | Not Applicable |
| Flow Rate @ 80 psi | 34 gpm |
| Feet of Head (Minimum) | 110 ft of head |
| Discharge Type | NPT |
| Flow Rate @ 50 psi | 37 gpm |
| Case Pressure (Maximum) | 375 psi |
| For Use With Potable Systems | Yes |
| Pump Housing Material | Cast Iron |
| Maximum RPM | 3,450 RPM |
| Compatible with Media Type | Water |
| Flow Rate @ 180 psi | 17 gpm |
| Best Efficiency Pressure | 142 psi |
| Motor Enclosure Type | ODP |
| Impeller Design | Closed |
| Series | BT4 |
| Flow Rate @ 140 psi | 25 gpm |
| Maximum Feet of Head | 475 ft of head |
| Number of Stages | 13 |
| Standards | cCSAus Listed |
| Flow Rate @ 120 psi | 29 gpm |
| Maximum Flow Rate | 25 gpm |
| Flow Rate @ 160 psi | 21 gpm |
| Suction Lift (Maximum) | 10 ft |
| Thermal Overload Protection | Yes |
| Motor Ambient Temperature (Minimum) | 40 Degrees F |
| Mounting Orientation | Horizontal |
| Maximum Media Temperature | 120 Degrees F |
| Priming | Manual |
| Nameplate Voltage | 230V AC |
| Wetted Material | Buna, Carbon, Cast Iron, Ceramic, Stainless Steel |
| Pumping Application | Boosting Water Pressure from City Mains or Private Water Systems, Evaporative Cooling System Misters Water Circulation, Filtration, General Purpose Plumbing, Lawn and Crop Irrigation, Poultry Houses, Pressure Washing Buildings and Floors, Reverse Osmosis, Spray Cooling Equipment |
| Motor Ambient Temperature (Maximum) | 104 Degrees F |
| Shut Off Pressure (Maximum) | 205 psi |
| Duty Cycle | Continuous |
| Frequency | 60 Hz |
| Intake Type | NPT |
| Pressure Boost (Maximum) | 200 psi |
| Flow Rate @ 100 psi | 32 gpm |
| Flow Rate @ 30 psi | Not Applicable |
| Flow Rate @ 20 psi | Not Applicable |
| Nominal Voltage | 230V AC |