2" 4 HP Honda Powered Centrifugal Dewatering Pump
by Tsurumi
Original price
$779.99
-
Original price
$779.99
Original price
$779.99
$779.99
-
$779.99
Current price
$779.99
GPM of Water @ 90 Ft. of Head | 25 |
Self-Priming | Yes |
Application | Dewatering |
Material of Construction | Aluminum, Cast Iron |
Volute/Wear Plate | Cast Iron |
GPM of Water @ 10 Ft. of Head | 125 |
Sensor Type | Low Oil |
GPM of Water @ 60 Ft. of Head | 87 |
Mechanical Seal | Silicon Carbide |
Casing Adapter | Aluminum |
Impeller Material | Cast Iron |
GPM of Water @ 30 Ft. of Head | 120 |
Agency Compliance | EPA/CARB |
Roll Bar Frame | Steel |
Outlet | 2" NPT |
Inlet | 2 in MNPT |
GPM of Water @ 20 Ft. of Head | 126 |
HP | 4 hp |
Max. Suction Lift | 26 ft |
Item | Engine Driven Utility Pump |
Engine/Motor Type | Gas |
GPM of Water @ 80 Ft. of Head | 60 |
Engine Brand | Honda |
Engine RPM | 3600 |
Max. Head | 115 ft |
Solids Handling Capacity | 3/8" |
Max. Pressure | 50 psi |
GPM of Water @ 40 Ft. of Head | 115 |
Ignition Type | Recoil-Start |
Temp. Range | 33 Degrees to 104 Degrees F |
Tank Capacity | 0.66 gal |
GPM of Water @ 70 Ft. of Head | 75 |
GPM of Water @ 50 Ft. of Head | 100 |
Includes | Impeller Wrench |
Check Valve | Buna-N |
Impeller Type | Semi Open |
Volute Material | Cast Iron |
Pump Mechanism | Centrifugal |
Frame Design | Full-Frame |
Flow Rate @ 60 Ft. of Head | 87 gpm |
RPM | 3,600 RPM |
Power Source | Gas |
Inlet Gender | Male |
Flow Rate @ 80 Ft. of Head | 60 gpm |
Discharge | 2 in MNPT |
Flow Rate @ 10 Ft. of Head | 125 gpm |
Maximum Self-Priming Lift | 20 ft |
Frame Material | Steel |
Impeller Design | Semi-Open |
Flow Rate @ 40 Ft. of Head | 115 gpm |
Discharge Standard | NPT |
Flow Rate @ 20 Ft. of Head | 126 gpm |
Body Material | Cast Iron |
Inlet Standard | NPT |
Discharge Gender | Male |
Max. Liquid Temp. | 104 Degrees F |
Maximum Discharge Pressure | 50 psi |
Frame Design - Pumps | Full Tubular Frame |