2" 5.5 HP Honda Powered Trash Pump
by Tsurumi
Original price
$1,793.75
-
Original price
$1,793.75
Original price
$1,793.75
$1,793.75
-
$1,793.75
Current price
$1,793.75
| GPM of Water @ 50 Ft. of Head | 100 |
| Engine Brand | Honda |
| Material of Construction | Aluminum, Cast Iron |
| GPM of Water @ 20 Ft. of Head | 160 |
| GPM of Water @ 40 Ft. of Head | 130 |
| GPM of Water @ 10 Ft. of Head | 180 |
| GPM of Water @ 80 Ft. of Head | 25 |
| GPM of Water @ 60 Ft. of Head | 75 |
| Mechanical Seal | Silicon Carbide |
| Agency Compliance | EPA/CARB |
| Check Valve | Buna-N |
| Application | Dewatering |
| Max. Head | 90 ft |
| Solids Handling Capacity | 1" |
| Impeller Type | Semi Open |
| Temp. Range | 33 Degrees to 104 Degrees F |
| Engine/Motor Type | Gas |
| Volute/Wear Plate | Cast Iron |
| Ignition Type | Recoil-Start |
| Outlet | 2" NPT |
| Max. Pressure | 39 psi |
| Max. Suction Lift | 26 ft |
| GPM of Water @ 30 Ft. of Head | 150 |
| Self-Priming | Yes |
| Roll Bar Frame | Steel |
| Engine RPM | 3600 |
| Item | Engine Driven Utility Pump |
| HP | 5 1/2 hp |
| Sensor Type | Low Oil |
| Casing Adapter | Aluminum |
| Inlet | 2 in MNPT |
| Impeller Material | Chrome Iron |
| GPM of Water @ 70 Ft. of Head | 50 |
| Seal Material | Silicon Carbide |
| Tank Capacity | 0.95 gal |
| Body Material | Cast Iron |
| RPM | 3,600 RPM |
| Volute Material | Cast Iron |
| Flow Rate @ 60 Ft. of Head | 75 gpm |
| Flow Rate @ 20 Ft. of Head | 160 gpm |
| Inlet Standard | NPT |
| Flow Rate @ 10 Ft. of Head | 180 gpm |
| Discharge | 2 in MNPT |
| Maximum Self-Priming Lift | 20 ft |
| Maximum Discharge Pressure | 39 psi |
| Inlet Gender | Male |
| Flow Rate @ 40 Ft. of Head | 130 gpm |
| Power Source | Gas |
| Max. Liquid Temp. | 104 Degrees F |
| Flow Rate @ 80 Ft. of Head | 25 gpm |
| Discharge Gender | Male |
| Pump Mechanism | Centrifugal |
| Discharge Standard | NPT |
| Frame Design | Full-Frame |
| Frame Material | Steel |
| Impeller Design | Semi-Open |
| Frame Design - Pumps | Full Tubular Frame |