4" 8 HP Honda Powered Centrifugal Dewatering Pump
by Tsurumi
Original price
$2,231.25
-
Original price
$2,231.25
Original price
$2,231.25
$2,231.25
-
$2,231.25
Current price
$2,231.25
Tank Capacity | 1.59 gal |
GPM of Water @ 50 Ft. of Head | 225 |
GPM of Water @ 20 Ft. of Head | 387 |
Impeller Material | Cast Iron |
GPM of Water @ 90 Ft. of Head | 45 |
Roll Bar Frame | Steel |
GPM of Water @ 40 Ft. of Head | 280 |
Material of Construction | Aluminum, Cast Iron |
GPM of Water @ 100 Ft. of Head | 25 |
Mechanical Seal | Silicon Carbide |
Self-Priming | Yes |
GPM of Water @ 60 Ft. of Head | 175 |
Application | Dewatering |
Solids Handling Capacity | 3/8" |
Max. Head | 95 ft |
Sensor Type | Low Oil |
GPM of Water @ 10 Ft. of Head | 432 |
Max. Pressure | 41 psi |
Temp. Range | 33 Degrees to 104 Degrees F |
Impeller Type | Semi Open |
Ignition Type | Recoil-Start |
HP | 8 hp |
GPM of Water @ 80 Ft. of Head | 75 |
Item | Engine Driven Utility Pump |
Engine Brand | Honda |
Agency Compliance | EPA/CARB |
Inlet | 4 in MNPT |
Volute/Wear Plate | Cast Iron |
Max. Suction Lift | 26 ft |
Includes | Impeller Wrench |
Casing Adapter | Aluminum |
Check Valve | Buna-N |
Engine RPM | 3600 |
GPM of Water @ 30 Ft. of Head | 342 |
Engine/Motor Type | Gas |
GPM of Water @ 70 Ft. of Head | 125 |
Outlet | 4" NPT |
Flow Rate @ 80 Ft. of Head | 75 gpm |
Frame Material | Steel |
Inlet Standard | NPT |
Flow Rate @ 60 Ft. of Head | 175 gpm |
Impeller Design | Semi-Open |
Power Source | Gas |
Max. Liquid Temp. | 104 Degrees F |
Body Material | Cast Iron |
Flow Rate @ 10 Ft. of Head | 432 gpm |
RPM | 3,600 RPM |
Pump Mechanism | Centrifugal |
Discharge Gender | Male |
Inlet Gender | Male |
Frame Design | Full-Frame |
Discharge | 4 in MNPT |
Maximum Self-Priming Lift | 20 ft |
Flow Rate @ 40 Ft. of Head | 280 gpm |
Discharge Standard | NPT |
Maximum Discharge Pressure | 41 psi |
Flow Rate @ 20 Ft. of Head | 387 gpm |
Volute Material | Cast Iron |
Frame Design - Pumps | Full Tubular Frame |