Pump, Engine Driven, 3-1/2 HP, Cast Iron
by Banjo
Original price
$948.74
-
Original price
$948.74
Original price
$948.74
$948.74
-
$948.74
Current price
$948.74
Mfr # | 200PI-3 |
Max. Suction Lift | 12 ft |
GPM of Water @ 80 Ft. of Head | 45 |
GPM of Water @ 30 Ft. of Head | 135 |
GPM of Water @ 90 Ft. of Head | 35 |
Temp. Range | 32 Degrees to 150 Degrees F |
GPM of Water @ 10 Ft. of Head | 165 |
HP | 3 1/2 hp |
Seal Material | Viton |
Volute/Wear Plate | Cast Iron |
Agency Compliance | EPA |
GPM of Water @ 70 Ft. of Head | 47 |
Casing Adapter | Cast Iron |
Ignition Type | Solid State |
Engine RPM | 3600 |
GPM of Water @ 20 Ft. of Head | 150 |
Roll Bar Frame | None |
Impeller Material | Cast Iron |
Self-Priming | Yes |
GPM of Water @ 60 Ft. of Head | 80 |
Max. Head | 100 ft |
Max. Pressure | 40 psi |
Outlet | 2" NPT |
Application | Agricultural |
GPM of Water @ 50 Ft. of Head | 90 |
Check Valve | EPDM |
Sensor Type | None |
Engine Brand | Briggs & Stratton |
GPM of Water @ 100 Ft. of Head | 18 |
Item | Engine Driven Utility Pump |
Number of Impellers | 1 |
Inlet | 2 in FNPT |
Mechanical Seal | Carbon, Ceramic |
Impeller Type | Open |
Engine/Motor Type | Gas |
Tank Capacity | 0.75 gal |
Material of Construction | Cast Iron |
GPM of Water @ 40 Ft. of Head | 120 |
Frame Material | Cast Iron |
Volute Material | Cast Iron |
Inlet Standard | NPT |
Pump Mechanism | Centrifugal |
Discharge | 2 in FNPT |
Body Material | Cast Iron |
Power Source | Gas |
Discharge Standard | NPT |
Flow Rate @ 10 Ft. of Head | 165 gpm |
Maximum Discharge Pressure | 40 psi |
RPM | 3,600 RPM |
Flow Rate @ 20 Ft. of Head | 150 gpm |
Impeller Design | Open |
Flow Rate @ 40 Ft. of Head | 120 gpm |
Discharge Gender | Female |
Max. Liquid Temp. | 300 Degrees F |
Flow Rate @ 60 Ft. of Head | 80 gpm |
Inlet Gender | Male |
Flow Rate @ 80 Ft. of Head | 45 gpm |
Maximum Self-Priming Lift | 12 ft |
Frame Design - Pumps | Frame Rails with Top Handle |