1/2 HP PVDF Magnetic Drive Pump 230V 1" FNPT
Original price
$1,069.99
-
Original price
$1,069.99
Original price
$1,069.99
$1,069.99
-
$1,069.99
Current price
$1,069.99
| Item | Magnetic Drive Pump |
| HP | 1/2 hp |
| Voltage | 230 |
| Inlet | 1 in FNPT |
| Outlet | 3/4 in MNPT |
| Max. Head | 29 ft |
| Operating Pressure | 12.6 psi |
| Housing Material | PVDF |
| Full Load Amps | 2.4 |
| Gasket Material | FKM |
| GPM of Water @ 24 Ft. of Head | 17 |
| Max. Viscosity | 150 CPS |
| Series | DB5.5 |
| Application | Acids, Caustics, DI-Water, Plating Solutions, Sodium Hypochlorite |
| Motor Enclosure | TEFC |
| Mounting | Close Coupled |
| Impeller Material | PVDF |
| Bearing Type | Thrust & Radial |
| GPM of Water @ 15 Ft. of Head | 25 |
| GPM of Water @ 3 Ft. of Head | 30 |
| Design | Centrifugal |
| GPM of Water @ 9 Ft. of Head | 28 |
| Max. Specific Gravity | 1.8 |
| GPM of Water @ 18 Ft. of Head | 22 |
| GPM of Water @ 6 Ft. of Head | 30 |
| Motor Type | PSC |
| Flow Rate @ 40 ft of Head (Maximum) | Not Applicable |
| Full Load Current | 2.4 A |
| Mounting Orientation | Horizontal |
| Flow Rate @ 6 ft of Head (Maximum) | 30 gpm |
| Flow Rate @ 9 ft of Head (Maximum) | 28 gpm |
| Priming | Manual |
| Flow Rate @ 15 ft of Head (Maximum) | 25 gpm |
| Motor Mounting Type | Horizontal |
| Discharge Port | 3/4 in MNPT |
| Flow Rate @ 18 ft of Head (Maximum) | 22 gpm |
| Operating Pressure (Maximum) | 12.6 psi |
| Discharge Pipe Type | MNPT |
| Nameplate Voltage | 230V AC |
| Media Temperature (Maximum) | 220 Degrees F |
| Specific Gravity (Maximum) | 1.8 |
| Phase | Single |
| Viscosity (Maximum) | 150 cps |
| Flow Rate @ 24 ft of Head (Maximum) | 17 gpm |
| Feet of Head (Maximum) | 31 ft |
| Horsepower (Maximum) | 1/2 hp |
| Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
| Chemical Compatibility | Deionized Water |
| Flow Rate @ 3 ft of Head (Maximum) | 30 gpm |
| Intake Pipe Type | FNPT |
| Motor Speed (Maximum) | 3,450 RPM |
| Suction Port | 1 in FNPT |