Peristaltic Fixed Rate 45MPHP10 10GPD 100Psi 1/4"W
by STENNER
Original price
$479.99
-
Original price
$479.99
Original price
$479.99
$479.99
-
$479.99
Current price
$479.99
| Mfr # | 45MFH2A1SUG1 |
| Item - Chemical Metering Pumps | Chemical Metering Pump |
| Body Material | Polycarbonate |
| Reproducibility | +/-2.0% |
| Self-Priming | Yes |
| Voltage - Pumps | 115V AC |
| cc/Min. | 26.32 cc/min |
| Flow Rate Output Control | Fixed |
| Max. Flow (GPD) - Pumps | 10.00 gpd |
| Min. Flow Rate | 10 gpd |
| Hz | 60 |
| Reproducibility - Pumps | +/-2.0% |
| Includes | 20 ft Roll of Suction/Discharge Tubing, Pump Tube, Injection Check Valve 100 psi (6.9 bar) Maximum or 1 Injection Fitting 25 psi (1.7 bar) max, Mounting Bracket, Weighted Suction Line Strainer, (2) Additional Latches, (3) Connecting Nuts, (3) 1/4 in Ferrules |
| Max. Pressure - Pumps | 100 psi |
| Chemical Metering Pump Type | Peristaltic |
| HP - Pumps | 1/30 hp |
| Motor RPM | 26 RPM |
| Standards | cCSAus, CE Certified, cUSA, ETL Intertek Conforms to ANSI/NSF Std.50, UL Listed |
| Max. Viscosity - Pumps | 1,500 cps |
| Phase - Pumps | 1 |
| Tubing Material | Santoprene |
| Suction Lift | 25 ft |
| Features | Fixed Rate Single Head, Nonclogging Design, Valveless |
| Item | Chemical Metering Pump |
| Tubing Material - Peristaltic Pumps | Santoprene |
| Max. Flow Rate | 10 gpd |
| Number of Feeds | Single Head |
| Seals and O-Rings - Pumps | Santoprene |
| Head and Fitting Material - Pumps | Polycarbonate/Polypropylene/PVC |
| Max. Flow (gpd) - Pumps | 10.00 gpd |
| Roller Material | Polyethylene |
| Pressure (Maximum) | 100 psi |
| Metering Reproducibility | +/-2.0% |
| Viscosity (Maximum) | 1,500 cps |
| Chemical Compatibility | Ammonium Hydroxide, Antifreeze, Hydrochloric Acid 10%, Hydrochloric Acid 20%, Hydrochloric Acid 30%, Phosphoric Acid 100%, Phosphoric Acid 40%, Phosphoric Acid 50%, Phosphoric Acid 60%, Phosphoric Acid 70%, Phosphoric Acid 80%, Phosphoric Acid 90%, Potassium Hydroxide 50%, Sodium Hydroxide 20%, Sodium Hypochlorite 10%, Sodium Hypochlorite 5%, Sulfuric Acid 10%, Sulfuric Acid 20%, Sulfuric Acid 30%, Sulfuric Acid 40%, Water |
| Media Temp. Range | 32 Degrees F to 125 Degrees F |
| Control Programs | Manual Control |
| Motor Speed (Maximum) | 26 RPM |
| Discharge Connection Type | Tube |
| Max. Discharge Pressure | 100 psi |
| Duty Cycle | Continuous |
| Motor Type | Shaded Pole |
| Head Material | Polyethylene, Polypropylene |
| Frequency | 60 Hz |
| Housing Material | Polycarbonate |
| Motor Mounting Type | Not Applicable |
| Electrical Connection Type | Plug-In |
| Media Temperature (Maximum) | 125 Degrees F |
| Fitting Material | Polypropylene, PVC |
| Seal Material | Santoprene |
| Phase | Single |
| Priming | Self-Priming |
| Media Temperature (Minimum) | 32 Degrees F |
| Horsepower (Maximum) | 1/30 hp |
| Flow Rate (Maximum) | 10 gpd |
| Ambient Temperature (Maximum) | 125 Degrees F |
| Flow Rate (Minimum) | Not Applicable |
| Turn Down Ratio | Not Applicable |
| Intake Connection Type | Tube |
| Degassing Valve Included | No |
| Nameplate Voltage | 120V AC |