Utility Transfer Pump, 1/2 HP, 1 Ph, 115V
by Zoeller
Original price
$424.99
-
Original price
$424.99
Original price
$424.99
$424.99
-
$424.99
Current price
$424.99
| Item | Utility Pump |
| Inlet | 3/4 in NPT |
| Outlet | 3/4 in NPT |
| Wetted Materials | Brass, Cast Iron, Plastic |
| HP | 1/2 hp |
| Voltage | 115 |
| Seal Material | Carbon, Ceramic |
| Best Efficiency Range GPM @ Head | 14 to 17.50 gpm @ 50 to 70 ft |
| Suction Lift | 15 ft |
| Max. Head | 115 ft |
| Housing Material | Cast iron |
| Bearing Type | Ball |
| Inlet Pressure | 50 psi |
| GPM of Water @ 30 Ft. of Head | 20 |
| GPH of Water @ 30 PSI | 800 |
| Max. Specific Gravity | 1.0 |
| GPM of Water @ 15 Ft. of Head | 22 |
| GPM of Water @ 10 Ft. of Head | 22.5 |
| Agency Compliance | CSA |
| GPH of Water @ 20 PSI | 1,100 |
| GPM of Water @ 60 Ft. of Head | 16 |
| Impeller Material | Thermoplastic |
| Duty | Intermittent |
| GPM of Water @ 50 Ft. of Head | 17 |
| GPM of Water @ 20 Ft. of Head | 21.5 |
| GPM of Water @ 1 Ft. of Head | 23.5 |
| GPM of Water @ 40 Ft. of Head | 18 |
| GPH of Water @ 25 PSI | 950 |
| Includes | 3/4 in NPT Brass, Lead Free Garden Hose Adapters, Suction Screen and Extra Set of Brushes |
| Hz | 60 |
| GPH of Water @ 5 PSI | 1,300 |
| GPM of Water @ 5 Ft. of Head | 23 |
| Phase | Single |
| GPH of Water @ 10 PSI | 1,275 |
| Motor Type | AC |
| Max. Liquid Temp. | 120 Degrees F |
| GPM of Water @ 70 Ft. of Head | 13 |
| GPH of Water @ 15 PSI | 1,150 |
| GPM of Water @ 90 Ft. of Head | 7 |
| Max. Pressure | 50 PSI |
| GPM of Water @ 80 Ft. of Head | 11 |
| Amps | 8.0 A |
| GPM of Water @ 35 Ft. of Head | 19 |
| GPH of Water @ 40 PSI | 300 |
| Motor Enclosure | Totally Enclosed Air Over |
| GPH of Water @ 35 PSI | 650 |
| GPM of Water @ 25 Ft. of Head | 21 |
| Impeller Type | Open |
| Features | Handle on Prime Plug Allows for Easy Priming, Permanently-Lubricated Ball Bearings |
| Seal Type | Mechanical Cartridge |
| Shaft Material | Carbon Ceramic |
| Flow Rate @ 80 ft of Head (Maximum) | 6.5 gpm |
| Specific Gravity (Maximum) | 1 |
| Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
| Horsepower | 1/2 hp |
| Best Efficiency Head | 110 ft |
| Flow Rate @ 20 ft of Head (Maximum) | 21.5 gpm |
| Maximum Feet of Head | 115 ft |
| Flow Rate @ 5 ft of Head (Maximum) | 23 gpm |
| Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 30 ft of Head (Maximum) | 20 gpm |
| Pump Housing Material | Cast Iron |
| Flow Rate @ 50 ft of Head (Maximum) | 17 gpm |
| Intake Type | NPT |
| Flow Rate @ 40 ft of Head (Maximum) | 18 gpm |
| Flow Rate @ 120 ft of Head (Maximum) | Not Applicable |
| Discharge Type | NPT |
| Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
| Impeller Design | Open |
| Flow Rate @ 100 ft of Head (Maximum) | 3.75 gpm |
| Flow Rate @ 90 ft of Head (Maximum) | 7 gpm |
| Flow Rate @ 1 ft of Head (Maximum) | 23.5 gpm |
| Priming | Self-Priming |
| Nameplate Voltage | 115V AC |
| Minimum Media Temperature | 40 Degrees F |
| Flow Rate @ 10 ft of Head (Maximum) | 22.5 gpm |
| Flow Rate @ 15 ft of Head (Maximum) | 22 gpm |
| Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
| Maximum Flow Rate | 23.33 gpm |
| NPSHr | 50 psi |
| Best Efficiency Flow | 23 gpm |
| Submersible | No |
| Flow Rate @ 70 ft of Head (Maximum) | 13 gpm |
| Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
| Suction Lift (Maximum) | 15 ft |
| Standards | CSA Certified |
| Frequency | 60 Hz |
| Flow Rate @ 60 ft of Head (Maximum) | 16 gpm |
| Shut Off Pressure (Maximum) | 50 psi |
| Duty Cycle | Intermittent |
| Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
| Wetted Material | Brass, Cast Iron, Plastic |
| Flow Rate @ 140 ft of Head (Maximum) | Not Applicable |