High Pressure Glue Injector
by BIG HORN
Original price
$52.94
-
Original price
$52.94
Original price
$52.94
$52.94
-
$52.94
Current price
$52.94
- Mfr #: 19405
- ✅ Features: High Impact Plastic Body | High Pressure Glue Injector | Removable Plunger | Manufactured by Maxmetrix LLC | Made in USA
- ✅ Filling Instructions: Moisten O-Ring before inserting the plunger and screwing the brass tip into the barrel. Pull the plunger back beyond the glue filling port, using a white or yellow water-based glue press nozzle against glue port and fill injector barrel. Wet barrel before use. Injector may be immersed in water to prevent glue from hardening
- ✅ Cleaning & Storage: Clean with warm water and brush. Brass nozzle may be removed for thorough cleaning | Regularly lubricate, using cooking oil on O-Ring to maintain a smooth and airtight seal | Do not allow glue to dry in the injector | Do not use solvent to clean
- ✅ Applications: Reglue Joints (Furniture, Doors, Stair Rails, Cabinetry and more)
- ✅ Drill a 1/32" hole that opens into a cavity where the joint needs reglueing (1/16" nozzle for higher volume dispensing is available from your retailer).
- ✅ Place the brass tip into the drilled hole, inject until excess glue begins to appear around joints.
- ✅ Remove excess glue with damp towel and apply clamps. When dry remove the clamps and fill the drilled hole if necessary. Touch up with color.
- ✅ Repair Veneer: Drill a 1/32" hole into the veneer where gluing is needed | Inject a small amount of glue into the drilled hole. Roll the area with a roller to spread the glue evenly. TIP: A wooder wallpaper roller works well | Remove excess glue and apply a clamp
- ✅ Repair Squeaky Flooring: At squeak location, drill a 1/32" hole deep enough to open into the cavity between the backing and flooring | Place the brass tip into the drilled hole and dispense glue | Wipe excess glue, with damp towel. When dry, fill the drilled hole and touch up with color