Centrifugal Pump, 3 HP, 208-230/460VAC
Original price
$3,307.50
-
Original price
$3,307.50
Original price
$3,307.50
$3,307.50
-
$3,307.50
Current price
$3,307.50
HP - Pumps | 3 hp |
Voltage - Pumps | 208 to 240/480V AC |
Phase - Pumps | 3 |
Housing Material - Pumps | Cast Iron |
Max. Pressure - Pumps | 175 psi |
Max. Head | 61 ft |
Motor Enclosure - Pumps | Open Dripproof |
Port Rotation | 90 Degrees Increments |
Min. GPM @ Head | 50 @ 60 ft |
Impeller Type | Closed |
Best Efficiency GPM @ Head | 125 gpm @ 55 ft |
HP | 3 |
Inlet | 3" NPT |
Duty | Continuous |
Frame | 145 |
GPM of Water @ 40 Ft. of Head | 108 |
Seal Material | 316 Stainless Steel, Buna Elastomer, Carbon, Ceramic |
GPM of Water @ 30 Ft. of Head | 145 |
Wetted Materials | Bronze, Buna N, Carbon, Cast Iron, Ceramic, Stainless Steel |
GPM of Water @ 20 Ft. of Head | 172 |
Max. GPM @ Head | 190 @ 45 ft |
Outlet | 2-1/2" NPT |
Impeller Material | Bronze |
Max. Specific Gravity | 1 |
Max. Pressure | 175 psi |
Housing Material | Cast iron |
Motor Enclosure | Open Dripproof (ODP) |
Item | Centrifugal Pump |
Inlet Pressure | 100 psi |
Max. Liquid Temp. | 212 Degrees F |
Amps | 9.5-9.0/4.5 |
Voltage | 208-230/460VAC |
Item - Straight Centrifugal Pumps | Straight Centrifugal High Flow Pump |
Best Efficiency Range GPM @ Head | 50 to 170 gpm @ 45 to 20 ft |
Motor RPM | 3500 |
Priming | Manual |
Maximum Media Temperature | 212 Degrees F |
Flow Rate @ 10 ft of Head (Maximum) | Not Applicable |
Pumping Application | Booster Service, Irrigation, Liquid Transfer, Spraying Systems, Water Circulation |
Motor Frame Designation | 145JM |
Motor Enclosure Type | ODP |
Compatible with Media Type | Water |
Best Efficiency Flow | 125 gpm |
Intake Type | NPT |
Mounting Orientation | Horizontal |
Maximum Flow Rate | 190 gpm |
Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
Impeller Design | Closed |
Series | 3656 |
Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
Maximum RPM | 3,500 RPM |
Best Efficiency Head | 55 ft |
Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
Frequency | 60 Hz |
Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
Wetted Material | 316 Stainless Steel, Bronze, Buna-N, Carbon, Ceramic |
Flow Rate @ 20 ft of Head (Maximum) | Not Applicable |
Minimum Flow Rate | 108 gpm |
Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 60 ft of Head (Maximum) | 90 gpm |
Flow Rate @ 120 ft of Head (Maximum) | Not Applicable |
Discharge Rotation | 90 Degrees Increments |
Shut Off Pressure (Maximum) | 175 psi |
Features | Back Pull Out to Reduce Maintenance Down Time, Dynamic Balancing, Renewable Wear Rings |
Shaft Material | Stainless Steel |
Duty Cycle | Continuous |
Nameplate Voltage | 208-230/460V AC |
Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 15 ft of Head (Maximum) | Not Applicable |
Nominal Voltage | 208-230/460V AC |
Maximum Feet of Head | 61 ft |
Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
Phase | Three |
Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
Discharge Type | NPT |
Standards | ANSI 61, NSF Certified |
Horsepower | 3 hp |
Flow Rate @ 50 ft of Head (Maximum) | 170 gpm |
Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 140 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 90 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 30 ft of Head (Maximum) | Not Applicable |
For Use With Potable Systems | Yes |
Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 40 ft of Head (Maximum) | Not Applicable |
Specific Gravity (Maximum) | 1 |
Seal Type | Mechanical Type 21 |
Pump Housing Material | Cast Iron |