1/2 HP 2" Submersible Sewage Pump 115V
Original price
$944.99
-
Original price
$944.99
Original price
$944.99
$944.99
-
$944.99
Current price
$944.99
| HP | 1/2 |
| Switch Actuation | No Switch Included |
| Body Material | Cast Iron |
| Base Material | Glass Filled Nylon |
| Flow Rate @ 10 Ft. of Head | 63 gpm |
| Max. Head | 18.0 ft |
| Impeller Material | Thermoplastic |
| Voltage - Pumps | 120VAC |
| Mechanical Seal | Carbon-Rotary/Ceramic-Stationary, Buna N Elastomers |
| GPM of Water @ 15 Ft. of Head | 28 |
| Discharge NPT | 2" F |
| Amps | 0.00 |
| Item | Sewage Ejector Pump |
| Features | Upper and Lower Heavy Duty Ball Bearing Construction, Stainless Steel Fasteners, Power Cable Severe Duty Rated Oil and Water Resistant |
| Motor RPM | 1550 |
| Switch Type - Pumps | No Switch Included |
| Max. Head - Pumps | 18 ft. |
| GPM of Water @ 10 Ft. of Head | 63 |
| Pump HP | 1/2 |
| Max. Temp. | 140 Degrees F |
| Impeller Material - Pumps | Glass Filled Thermoplastic |
| Bearing Type | Ball |
| Shaft Seal Material - Pumps | Carbon, Ceramic, Nitrile Rubber |
| Thermal Protection | Yes |
| Pump Body Material | Cast Iron |
| Off Point | Manual |
| Agency Compliance | CSA |
| Duty | Continuous |
| Motor Type | Single Phase |
| On Point | Manual |
| Max. Liquid Temp. | 104 Degrees F (Continuous), 140 Degrees F (Intermittent) |
| Discharge | 2 in FNPT |
| Discharge Standard | NPT |
| Switch Electrical Connection | No Switch Included |
| Rated Voltage | 115V AC |
| RPM | 1,550 RPM |
| Flow Rate @ 15 Ft. of Head | 28 gpm |
| Discharge Gender | Female |
| Duty Cycle | Continuous |