1/10 HP Polypropylene Magnetic Drive Pump 115V 1" FPT
Original price
$388.74
-
Original price
$388.74
Original price
$388.74
$388.74
-
$388.74
Current price
$388.74
Item | Magnetic Drive Pump |
HP | 1/10 hp |
Voltage | 115 |
Inlet | 1 in FPT |
Outlet | 1/2 in FPT |
Max. Head | 24.3 ft |
Operating Pressure | 10.5 psi |
Housing Material | Polypropylene |
GPM of Water @ 6 Ft. of Head | 12.8 |
GPM of Water @ 3 Ft. of Head | 13.5 |
Design | Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level |
Temp. @ 20 psig | 90 Degrees F |
Temp. @ 0 psig | 150 Degrees F |
GPM of Water @ 15 Ft. of Head | 9.2 |
Bearing Type | Thrust |
Max. Specific Gravity | 1.1 |
Impeller Material | Polypropylene |
Motor Enclosure | OPFC |
Max. Viscosity | 100 SSU |
GPM of Water @ 18 Ft. of Head | 7.5 |
GPM of Water @ 9 Ft. of Head | 11.8 |
Temp. @ 10 psig | 120 Degrees F |
Full Load Amps | 1.70 |
GPM of Water @ 24 Ft. of Head | 1.0 |
Motor Type | PSC |
Series | MD-SC |
Mounting | Horizontal |
Gasket Material | Buna-N |
Application | For Mild Chemicals at Moderate Temperature, Eliminates Seal-caused Friction Loss, Wear, Contamination and Leakage |
Temp. @ 30 psig | 70 Degrees F |
Cord Type | 3-conductor SJP |
Flow Rate @ 24 ft of Head (Maximum) | 5 gpm |
Intake Pipe Type | FNPT |
Frequency | 60 Hz |
Discharge Pipe Type | NPT |
Flow Rate @ 3 ft of Head (Maximum) | 13.5 gpm |
Viscosity (Maximum) | 100 SUS |
Flow Rate @ 18 ft of Head (Maximum) | 13 gpm |
Operating Pressure (Maximum) | 10.5 psi |
Horsepower (Maximum) | 1/10 hp |
Nameplate Voltage | 115V AC |
Full Load Current | 1.7 A |
Flow Rate @ 6 ft of Head (Maximum) | 12.8 gpm |
Feet of Head (Maximum) | 24.3 ft |
Flow Rate @ 15 ft of Head (Maximum) | 9.1 gpm |
Specific Gravity (Maximum) | 1.1 |
Flow Rate @ 40 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
Suction Port | 1 in FNPT |
Ambient Temperature (Maximum) | 77 Degrees F |
Motor Mounting Type | Horizontal |
Phase | Single |
Media Temperature (Maximum) | 150 Degrees F |
Flow Rate @ 9 ft of Head (Maximum) | 11.8 gpm |
Discharge Port | 1/2 in NPT |