1/2 HP 2" Manual Submersible Sewage Pump 115V
Original price
$1,589.88
-
Original price
$1,589.88
Original price
$1,589.88
$1,589.88
-
$1,589.88
Current price
$1,589.88
HP | 1/2 |
Phase - Pumps | 1 |
Switch Actuation | No Switch Included |
Body Material | Cast Iron |
Base Material | Cast Iron |
Flow Rate @ 10 Ft. of Head | 122 gpm |
Max. Head | 19.0 ft |
Impeller Material | Cast Iron |
Voltage - Pumps | 120VAC |
Discharge NPT | 2" |
Switch Type - Pumps | No Switch Included |
Shaft Seal Material - Pumps | Silicone Carbide |
Pump Type | Manual |
Item | Sewage Ejector Pump |
Pump Body Material | Cast Iron |
Motor RPM | 1750 |
Voltage | 115 |
GPM of Water @ 10 Ft. of Head | 122 |
Housing Material | Cast iron |
Thermal Protection | Yes |
Shaft Seal | Silicon Carbide |
Amps - Pumps | 14.50 |
Item - Sewage Pumps | Submersible Sewage Pump |
Input Phase AC | 1 |
Agency Compliance | CSA Certified, UL Listed |
Bearing Type | Ball |
Max. Liquid Temp. | 104 Degrees F (Continuous), 140 Degrees F (Intermittent) |
Pump HP | 1/2 |
GPM of Water @ 20 Ft. of Head | 50 |
Impeller Material - Pumps | Cast Iron |
Motor Type | Capacitor Start |
Switch Type | None |
Max. Head - Pumps | 19 ft. |
Amps | 14.50 |
GPM of Water @ 15 Ft. of Head | 90 |
Phase | 1 |
Flow Rate @ 20 Ft. of Head | 50 gpm |
Discharge Standard | NPT |
Discharge Gender | Female |
Discharge | 2 in FNPT |
Off Point | N/A |
Duty Cycle | Continuous |
On Point | N/A |
RPM | 1,750 RPM |
Rated Voltage | 115V AC |
Switch Electrical Connection | No Switch Included |
Flow Rate @ 15 Ft. of Head | 90 gpm |
Type | Manual |