Skip to content

1/200 HP Polypropylene Magnetic Drive Pump 115V 1/2" OD

Original price $117.19 - Original price $117.19
Original price
$117.19
$117.19 - $117.19
Current price $117.19
Item Magnetic Drive Pump
HP 1/200 hp
Voltage 115
Inlet 1/2 in OD
Outlet 1/2 in OD
Max. Head 5.5 ft
Full Load Amps 0.40
Design Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level
Motor Enclosure Open
Temp. @ 0 psig 150 Degrees F
Max. Viscosity 100 SSU
GPM of Water @ 3 Ft. of Head 2.1
Temp. @ 10 psig 120 Degrees F
Application For Photographic and Plating Solutions, Mild Acids, Mild Alkalis and Other Nonflammable Liquids Compatible with Pump Component Materials, Eliminates Seal-Caused Friction Loss, Wear, Contamination and Leakage
Temp. @ 30 psig 70 Degrees F
Cord Type Stripped Leads
Motor Type SP
Gasket Material Buna-N
Temp. @ 20 psig 90 Degrees F
Series MD
Impeller Material Glass Filled Polypropylene
Max. Specific Gravity 1.1
Mounting Horizontal
Feet of Head (Maximum) 5.4 ft
Full Load Current 0.4 A
Discharge Pipe Type Hose
Intake Pipe Type Hose
Flow Rate @ 50 ft of Head (Maximum) Not Applicable
Flow Rate @ 40 ft of Head (Maximum) Not Applicable
Suction Port 1/2 in Hose
Specific Gravity (Maximum) 1.1
Flow Rate @ 9 ft of Head (Maximum) Not Applicable
Ambient Temperature (Maximum) 77 Degrees F
Frequency 60 Hz
Flow Rate @ 18 ft of Head (Maximum) Not Applicable
Horsepower (Maximum) 1/200 hp
Flow Rate @ 6 ft of Head (Maximum) Not Applicable
Motor Mounting Type Horizontal
Viscosity (Maximum) 100 SUS
Discharge Port 1/2 in Hose
Phase Single
Media Temperature (Maximum) 150 Degrees F
Flow Rate @ 3 ft of Head (Maximum) 1.7 gpm
Operating Pressure (Maximum) 2.33 psi
Nameplate Voltage 115V AC
Flow Rate @ 24 ft of Head (Maximum) Not Applicable
Flow Rate @ 15 ft of Head (Maximum) Not Applicable

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare