1/25 HP Noryl/Aluminum Centrifugal Pump 115V 3/4" T
Original price
$336.24
-
Original price
$336.24
Original price
$336.24
$336.24
-
$336.24
Current price
$336.24
| HP | 1/25 hp |
| Item | Centrifugal Pump |
| Housing Material | Noryl/Aluminum |
| Phase | 1 |
| Voltage | 115 |
| Max. GPM @ Head | 11.6 gpm @ 1 ft |
| Max. Head | 18 7/10 ft |
| Inlet | 3/4 in T |
| Best Efficiency GPM @ Head | 11.00 gpm @ 2.62 ft |
| Outlet | 3/4 in T |
| Motor Enclosure | TEFC |
| Max. Temp. | 140 Degrees F |
| Impeller Material | Nylon/Stainless Steel 316 |
| GPM of Water @ 9 Ft. of Head | 8.4 |
| Service Factor | 1 |
| Max. Case Pressure | 200 psi |
| Cord | 4 ft |
| Amps | 0.56 |
| Best Efficiency Range GPM @ Head | 6.60 to 11.60 gpm @ 1 to 13.12 ft |
| Motor RPM | 3,100 RPM |
| Volute Material | Noryl |
| Application | Water Circulation/Liquid transfer |
| Max. Pressure | 29 psi |
| GPM of Water @ 7 Ft. of Head | 9.25 |
| Drain Plug | No |
| Motor Type | Spherical |
| Impeller Type | Semi Open |
| Includes | Power cord |
| Seal Type | O-ring |
| Max. Fluid Viscosity | 30 cps |
| NEMA/IEC Frame | 56 |
| Shaft Material | Stainless Steel |
| Max. Liquid Temp. | 140 Degrees F |
| GPM of Water @ 10 Ft. of Head | 8 |
| Wetted Materials | 316 Stainless Steel, CarboN/Allumina Ceramic, EPDM, Noryl, Viton |
| GPM of Water @ 5 Ft. of Head | 10 |
| GPM of Water @ 3 Ft. of Head | 10.75 |
| Port Rotation | CCW |
| Seal Material | EPDM |
| Screw Material | Stainless Steel |
| GPM of Water @ 2 Ft. of Head | 11.2 |
| GPM of Water @ 1 Ft. of Head | 11.75 |
| Min. GPM @ Head | 1 gpm @ 18.25 ft |
| Duty | Continuous |
| Inlet Pressure | 75 psi |
| Bearing Type | Ceramic |
| GPM of Water @ 15 Ft. of Head | 5.5 |
| Hz | 50/60 |
| Flow Rate @ 1 ft of Head (Maximum) | 11.75 gpm |
| Ambient Temperature (Maximum) | 140 Degrees F |
| Compatible Motor Frame | 56J NEMA |
| Current | 0.56 A |
| Impeller Design | Semi-Open |
| Best Efficiency Head | 2.62 ft |
| Duty Cycle | Continuous |
| Nameplate Voltage | 115V AC |
| Frequency | 60 Hz |
| Discharge Port | 3/4 in |
| Wetted Material | 316 Stainless Steel, Carbon, EPDM, Noryl, Viton |
| Flow Rate (Maximum) | 11.6 gpm |
| Media Temperature (Maximum) | 140 Degrees F |
| Feet of Head (Maximum) | 18.7 ft |
| Flow Rate (Minimum) | 1 gpm |
| Case Pressure (Maximum) | 200 psi |
| Shut Off Pressure (Maximum) | 29 psi |
| Flow Rate @ 15 ft of Head (Maximum) | 5.5 gpm |
| Best Efficiency Flow | 11 gpm |
| Motor Speed (Maximum) | 3,100 RPM |
| Viscosity (Maximum) | 30 cps |
| Flow Rate @ 10 ft of Head (Maximum) | 8 gpm |
| Flow Rate @ 5 ft of Head (Maximum) | 10 gpm |
| Suction Port | 3/4 in |
| Horsepower (Maximum) | 1/25 hp |