1/25 HP PPS Magnetic Drive Pump 115V 1/2" FPT
Original price
$398.74
-
Original price
$398.74
Original price
$398.74
$398.74
-
$398.74
Current price
$398.74
Item | Magnetic Drive Pump |
HP | 1/25 hp |
Voltage | 115 |
Inlet | 1/2 in FPT |
Outlet | 1/2 in MPT |
Max. Head | 16.3 ft |
Housing Material | PPS |
Temp. @ 0 psig | 180 Degrees F |
Impeller Material | PPS |
Design | Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level |
Application | For Highly Corrosive Chemicals, Eliminates Seal-caused Friction Loss, Wear, Contamination and Leakage |
Bearing Type | Thrust |
GPM of Water @ 3 Ft. of Head | 9.1 |
Full Load Amps | 1.30 |
Mounting | Horizontal |
GPM of Water @ 9 Ft. of Head | 6.5 |
Max. Specific Gravity | 1.1 |
Temp. @ 20 psig | 145 Degrees F |
Max. Viscosity | 100 SSU |
Motor Enclosure | TEFC |
Temp. @ 30 psig | 135 Degrees F |
Series | MD-HC |
Temp. @ 10 psig | 165 Degrees F |
Gasket Material | FKM |
Cord Type | 3-conductor SJO |
Motor Type | SP |
GPM of Water @ 15 Ft. of Head | 2.5 |
GPM of Water @ 6 Ft. of Head | 8.2 |
Motor Mounting Type | Horizontal |
Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
Intake Pipe Type | FNPT |
Phase | Single |
Media Temperature (Maximum) | 200 Degrees F |
Full Load Current | 1.3 A |
Discharge Pipe Type | NPT |
Flow Rate @ 3 ft of Head (Maximum) | 9.2 gpm |
Flow Rate @ 6 ft of Head (Maximum) | 8.1 gpm |
Nameplate Voltage | 115V AC |
Viscosity (Maximum) | 100 SUS |
Flow Rate @ 18 ft of Head (Maximum) | Not Applicable |
Feet of Head (Maximum) | 16.3 ft |
Horsepower (Maximum) | 1/25 hp |
Operating Pressure (Maximum) | 7.05 psi |
Frequency | 60 Hz |
Discharge Port | 1/2 in NPT |
Specific Gravity (Maximum) | 1.1 |
Suction Port | 1/2 in FNPT |
Flow Rate @ 15 ft of Head (Maximum) | 2.6 gpm |
Flow Rate @ 40 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 9 ft of Head (Maximum) | 6.5 gpm |
Flow Rate @ 24 ft of Head (Maximum) | Not Applicable |