Skip to content

1/25 HP PPS Magnetic Drive Pump 115V 1/2" MPT

Original price $341.24 - Original price $341.24
Original price
$341.24
$341.24 - $341.24
Current price $341.24
Item Magnetic Drive Pump
HP 1/25 hp
Voltage 115
Inlet 1/2 in MPT
Outlet 1/2 in MPT
Max. Head 16.2 ft
Housing Material PPS
Full Load Amps 1.40
Gasket Material FKM
Mounting Horizontal
GPM of Water @ 3 Ft. of Head 7.6
Temp. @ 0 psig 180 Degrees F
Cord Type 3-conductor SJO
GPM of Water @ 9 Ft. of Head 5.9
Temp. @ 20 psig 145 Degrees F
Max. Specific Gravity 1.1
Motor Type SP
Temp. @ 10 psig 165 Degrees F
Impeller Material PPS
GPM of Water @ 6 Ft. of Head 7.1
Design Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level
Max. Viscosity 100 SSU
Application For Highly Corrosive Chemicals, Eliminates Seal-caused Friction Loss, Wear, Contamination and Leakage
Bearing Type Thrust
Temp. @ 30 psig 135 Degrees F
Series MD-HC
GPM of Water @ 15 Ft. of Head 1.7
Motor Enclosure OPFC
Flow Rate @ 50 ft of Head (Maximum) Not Applicable
Flow Rate @ 18 ft of Head (Maximum) Not Applicable
Discharge Pipe Type NPT
Viscosity (Maximum) 100 SUS
Flow Rate @ 9 ft of Head (Maximum) 5.9 gpm
Flow Rate @ 40 ft of Head (Maximum) Not Applicable
Flow Rate @ 6 ft of Head (Maximum) 7.1 gpm
Motor Mounting Type Horizontal
Specific Gravity (Maximum) 1.1
Media Temperature (Maximum) 200 Degrees F
Nameplate Voltage 115V AC
Discharge Port 1/2 in NPT
Frequency 60 Hz
Operating Pressure (Maximum) 7.01 psi
Full Load Current 1.3 A
Horsepower (Maximum) 1/25 hp
Feet of Head (Maximum) 16.2 ft
Flow Rate @ 24 ft of Head (Maximum) Not Applicable
Suction Port 1/2 in MNPT
Flow Rate @ 3 ft of Head (Maximum) 7.6 gpm
Phase Single
Ambient Temperature (Maximum) 77 Degrees F
Flow Rate @ 15 ft of Head (Maximum) 1.7 gpm
Intake Pipe Type MNPT

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare