1/8 HP Polypropylene Magnetic Drive Pump 115V 1" FNPT
Original price
$572.49
-
Original price
$572.49
Original price
$572.49
$572.49
-
$572.49
Current price
$572.49
Item | Magnetic Drive Pump |
HP | 1/8 hp |
Voltage | 115 |
Inlet | 1 in FNPT |
Outlet | 1/2 in MNPT |
Max. Head | 21 ft |
Operating Pressure | 8.2 psi |
Housing Material | Polypropylene |
Impeller Material | Polypropylene |
Motor Type | PSC |
Series | DB3 |
Full Load Amps | 1.55 |
Mounting | Close Coupled |
Application | Acids, Caustics, DI-Water, Plating Solutions |
Max. Specific Gravity | 1.2 |
Max. Viscosity | 50 CPS |
GPM of Water @ 15 Ft. of Head | 8.5 |
GPM of Water @ 9 Ft. of Head | 12.5 |
Motor Enclosure | TEFC |
GPM of Water @ 3 Ft. of Head | 15 |
Bearing Type | Thrust & Radial |
GPM of Water @ 18 Ft. of Head | 5.5 |
Design | Centrifugal |
Gasket Material | Fluoroelastomer |
GPM of Water @ 6 Ft. of Head | 14 |
Discharge Port | 1/2 in MNPT |
Intake Pipe Type | FNPT |
Flow Rate @ 40 ft of Head (Maximum) | Not Applicable |
Priming | Manual |
Operating Pressure (Maximum) | 8.2 psi |
Flow Rate @ 3 ft of Head (Maximum) | 15 gpm |
Suction Port | 1 in FNPT |
Phase | Single |
Motor Mounting Type | Horizontal |
Motor Speed (Maximum) | 3,450 RPM |
Feet of Head (Maximum) | 20.4 ft |
Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
Discharge Pipe Type | MNPT |
Flow Rate @ 18 ft of Head (Maximum) | 5.5 gpm |
Mounting Orientation | Horizontal |
Media Temperature (Maximum) | 180 Degrees F |
Specific Gravity (Maximum) | 1.8 |
Flow Rate @ 24 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 15 ft of Head (Maximum) | 8.5 gpm |
Viscosity (Maximum) | 50 cps |
Nameplate Voltage | 115V AC |
Flow Rate @ 9 ft of Head (Maximum) | 12.5 gpm |
Horsepower (Maximum) | 1/8 hp |
Chemical Compatibility | Deionized Water |
Flow Rate @ 6 ft of Head (Maximum) | 14 gpm |
Full Load Current | 1.55 A |