Fuel Transfer Pump, 115VAC, 12 GPM, 1/8 HP
by GPI
Original price
$713.74
-
Original price
$713.74
Original price
$713.74
$713.74
-
$713.74
Current price
$713.74
| Voltage | 115V AC |
| HP | 1/8 |
| Housing Material | Cast Aluminum |
| GPM | 12 gpm |
| Seal Material | Buna-N |
| RPM | 1400 |
| Pump Design | Gear |
| Self-Priming | Yes |
| Seal Type | Lip |
| Max. Viscosity | 50 SUS |
| Item | Fuel Transfer Pump |
| Duty Cycle | 30 Minutes On/30 Minutes Off |
| For Use With | Diesel, Gasoline, Kerosene, E15 |
| Nozzle Material | Aluminum |
| Includes | Automatic Unleaded Nozzle, Dispensing Hose with Static Wire, Lockable Nozzle Holder, Pump with Spin Collar, Tank Adapter, Telescoping Suction Pipe |
| Compatible Fluids | Diesel, Gasoline, Kerosene, E15 |
| Max. Head - Pumps | 4 4/5 ft |
| Motor Enclosure | Explosion Proof |
| Adapter Material | Aluminum |
| Wetted Materials | Not Applicable |
| Features | Self priming, Powder-coated aluminum body,telescoping suction pipe (15in - 40in), Easy installation spin collar mount, Explosion Proof Motor, Thermal Overload Protection |
| Motor RPM | 1,400 RPM |
| Housing Material - Pumps | Aluminum |
| Transfer Pump Application | Stationary Locations in Fleet |
| Bearing Type | Sleeve |
| Standards | Class I Div 2, cULus Listed, IECEx/ATEX Zone 1 |
| Metered | No |
| Amps AC | 1.8 |
| Pressure Range | 15 psi |
| Bypass Valve | Yes |
| Agency Compliance | Class I, Division 2, Group D, cULus |
| Nozzle Type | Automatic |
| Mount Type | Bung |
| Suction Tube OD | 1 in |
| Includes Nozzle | Yes |
| Motor HP | 1/8 hp |
| Includes Spout | No |
| Hose Tube Material | Nitrile |
| Meter Type | Not Applicable |
| Includes Bung Adapter | Yes |
| Housing Finish | Powder Coated |
| Variable Speed | No |
| Thermal Protection | Yes |
| Hose Cover Material | Nitrile |
| For Media Type | Diesel, Gasoline, Kerosene |
| Explosion Proof | Yes |
| Adapter Connection Type | MNPT |
| Frequency (Hz) | 60 Hz |
| Max. Outlet Pressure | 15 psi |
| Includes Suction Tube | Yes |
| Compatible Chemicals | Diesel, Gasoline, Kerosene |
| Max. Fluid Temp. | 125 Degrees F |
| Diesel Exhaust Fluid Compatible | No |
| Meter Unit Of Measure | Not Applicable |
| Number of Phases | 1 |
| Pump Connection Type | FNPT |
| Max. Flow Rate | 12 gpm |
| Runs Dry | No |
| Suction Tube Material | Polypropylene |
| Nozzle Fluid Compatibility | Diesel |
| Nozzle Operation | Automatic |
| Rated Voltage | 115V AC |
| Food Grade | No |
| Includes Discharge Hose | Yes |
| Min. Fluid Temp. | -20 Degrees F |
| Spout Material | Aluminum |
| Power Source | Electric |
| Filter Included | Not Applicable |
| Discharge Connection Type | FNPT |
| Full Load Amps | 1.8 A |