Inverter and Battery Charger, Polycarbonate Case, Sine Wave Form, 2000W Nominal Output, 2 Outlets
by TRIPP LITE
Original price
$1,733.74
-
Original price
$1,733.74
Original price
$1,733.74
$1,733.74
-
$1,733.74
Current price
$1,733.74
Mfr # | UT2012UL |
Item | Inverter and Battery Charger |
Peak Output Power | 4000W |
Nominal Output Power | 2000W |
Case Material | Polycarbonate |
Inverter Input Voltage | 120V AC; 12V DC |
Inveter Output Voltage | 120V |
Number of Outlets | 2 |
Outlet Type | GFCI |
DC Connection | Bolt Down Terminals |
Inverter Output Form | Sine Wave |
Standards | CSA, UL458 |
Charger Output Voltage | 120V |
Features | Automatic Overload, Thermal Shutoff |
Cooling Method | Fan |
Charger Input Voltage | 120V AC |
Inverter Output Voltage | 120V AC |
Charger Output Amps | 60 A |
Automatic/Manual | Automatic |
Includes | Remote Control Module |
Output Frequency | 60 Hz |
Input Voltage | 12VDC |
Output Voltage | 115VAC |
Charger Input Current | 15 A |
Charger Output Current | 60 A |
Continuous Power Load | 2000 W |
Receptacles | 2 x NEMA 5-15R |
Waveform Type | Pulse-width Modulated Sine Wave |
Product Name | UT2012UL DC-to-AC Inverter |
Package Contents | UT2012UL DC-to-AC Inverter, Remote, Remote Battery Temperature Sensor Cable, Instruction Manual with Warranty Information |
Maximum Frequency | 60 Hz |
Peak Power Load | 4000 W |
Product Type | Power Inverter |
Nominal Output Voltage(s) Supported | 120V |
Expandable Runtime | Yes |
AC Suppression Joule Rating | 600 |
Low Voltage Transfer to Battery Power | In AC "auto" mode, inverter / charger switches to battery mode as line voltage drops to 75V (user adjustable to 85,95,105 -see manual) |
Frequency Compatibility | 60 Hz |
Form Factors Supported | Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information) |
DC System Voltage (VDC) | 12 |
Relative Humidity | 0%-95% Non-Condensing |
Output Nominal Voltage | 120V |
Output Receptacles | (2) 5-15R |
Receptacle Color | White |
High Voltage Transfer to Battery Power | In AC "auto" mode, inverter / charger switches to battery mode as line voltages increases 135V (user adjustable to 145 -see manual) |
Input Connection Type | DC INPUT: set of two (2) DC bolt-down terminals. AC INPUT: NEMA 5-15R GFCI input plug |
Material of Construction | Polycarbonate |
Transfer Time (Line Power to Battery Mode) | 16.6 milliseconds (typical -compatible with many computers, servers and networking equipment -verify transfer time compatibility loads for UPS applications) |
Recommended Electrical Service | DC INPUT: Requires 12VDC input source capable of delivering 192A for the required Duration (when used at full continuous capacity- DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A 120VAC recommended. |
Front Panel LEDs | Set of (6) LEDs offer continuous status information on load percentage ( 6 levels reported) and battery charge level (7 levels reported) See manual for sequences |
Nominal Input Voltage(s) Supported | 120V AC |
Outlet Details | 2 NEMA 5-15R GFCI protected outlets |
Switches | 3 position on / off remote switch enables simple on / off power control plus "auto/ remote" |
Voltage Compatibility (VDC) | 12 |
Voltage Compatibility (VAC) | 120 |
Pure Sine Wave Output | No |
Product Certifications | CSA (Canada); UL 458 |
Overload Protection | Includes 25A input breaker dedicated to the charging system and 20A output breaker for AC output loads |
Output Frequency Regulation | 60 Hz (+/- 0.3Hz) |
Battery Charge | 15A / 60A (selectable) |
Output Voltage Regulation | LINE POWER (AC): Maintains 120V nominal sine wave output from line Source. Inverter Power (AC) Maintains PWM sine wave output voltage of 120 VAC (+/- 5%) |
Battery Pack Accessory (Optional) | 98-121 sealed lead acid battery (optional) |
Package Includes | UT2012UL Inverter/Charger;APSRM4 Remote;Remote battery temperature sensor cable;Instruction manual with warranty information |
Continuous Output Capacity (Watts) | 2000 |