Pump, Engine Driven, 3-1/2 HP, Poly
by Banjo
Original price
$711.24
-
Original price
$711.24
Original price
$711.24
$711.24
-
$711.24
Current price
$711.24
Mfr # | 200P-3 |
Seal Material | EPDM |
Number of Impellers | 1 |
HP | 3 1/2 hp |
Outlet | 2" NPT |
Material of Construction | Polypropylene |
Impeller Type | Open |
Application | Agricultural |
Engine Brand | Briggs & Stratton |
GPM of Water @ 70 Ft. of Head | 135 |
Temp. Range | 32 Degrees to 150 Degrees F |
Impeller Material | Polypropylene |
Inlet | 2 in FNPT |
Engine RPM | 3600 |
GPM of Water @ 50 Ft. of Head | 150 |
Casing Adapter | Polypropylene |
Engine/Motor Type | Gas |
Max. Head | 120 ft |
Agency Compliance | EPA |
GPM of Water @ 20 Ft. of Head | 190 |
GPM of Water @ 30 Ft. of Head | 180 |
Max. Suction Lift | 12 ft |
Sensor Type | None |
Tank Capacity | 0.75 gal |
GPM of Water @ 40 Ft. of Head | 160 |
GPM of Water @ 100 Ft. of Head | 78 |
GPM of Water @ 90 Ft. of Head | 107 |
Volute/Wear Plate | Polypropylene |
Ignition Type | Solid State |
Max. Pressure | 55 psi |
Mechanical Seal | Carbon, Ceramic |
GPM of Water @ 60 Ft. of Head | 140 |
Item | Engine Driven Utility Pump |
GPM of Water @ 80 Ft. of Head | 115 |
Roll Bar Frame | None |
GPM of Water @ 10 Ft. of Head | 200 |
Check Valve | EPDM |
Self-Priming | Yes |
Discharge | 2 in FNPT |
Flow Rate @ 20 Ft. of Head | 190 gpm |
Body Material | Polypropylene |
Power Source | Gas |
Maximum Discharge Pressure | 55 psi |
Maximum Self-Priming Lift | 12 ft |
Pump Mechanism | Centrifugal |
Discharge Gender | Female |
Frame Material | polypropylene |
Flow Rate @ 40 Ft. of Head | 160 gpm |
Impeller Design | Open |
Volute Material | Polypropylene |
Max. Liquid Temp. | 150 Degrees F |
RPM | 3,600 RPM |
Flow Rate @ 60 Ft. of Head | 140 gpm |
Flow Rate @ 10 Ft. of Head | 200 gpm |
Discharge Standard | NPT |
Flow Rate @ 80 Ft. of Head | 115 gpm |
Inlet Gender | Male |
Inlet Standard | NPT |
Frame Design - Pumps | No Frame |