Skip to content

Inverter and Battery Charger, Polycarbonate Case, Sine Wave Form, 2000W Nominal Output, 2 Outlets

Original price $1,733.74 - Original price $1,733.74
Original price
$1,733.74
$1,733.74 - $1,733.74
Current price $1,733.74
Item Inverter and Battery Charger
Peak Output Power 4000W
Nominal Output Power 2000W
Case Material Polycarbonate
Inverter Input Voltage 120V AC; 12V DC
Inveter Output Voltage 120V
Number of Outlets 2
Outlet Type GFCI
DC Connection Bolt Down Terminals
Inverter Output Form Sine Wave
Standards CSA, UL458
Charger Output Voltage 120V
Features Automatic Overload, Thermal Shutoff
Cooling Method Fan
Charger Input Voltage 120V AC
Inverter Output Voltage 120V AC
Charger Output Amps 60 A
Automatic/Manual Automatic
Includes Remote Control Module
Output Frequency 60 Hz
Input Voltage 12VDC
Output Voltage 115VAC
Charger Input Current 15 A
Charger Output Current 60 A
Continuous Power Load 2000 W
Receptacles 2 x NEMA 5-15R
Waveform Type Pulse-width Modulated Sine Wave
Product Name UT2012UL DC-to-AC Inverter
Package Contents UT2012UL DC-to-AC Inverter, Remote, Remote Battery Temperature Sensor Cable, Instruction Manual with Warranty Information
Maximum Frequency 60 Hz
Peak Power Load 4000 W
Product Type Power Inverter
Nominal Output Voltage(s) Supported 120V
Expandable Runtime Yes
AC Suppression Joule Rating 600
Low Voltage Transfer to Battery Power In AC "auto" mode, inverter / charger switches to battery mode as line voltage drops to 75V (user adjustable to 85,95,105 -see manual)
Frequency Compatibility 60 Hz
Form Factors Supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
DC System Voltage (VDC) 12
Relative Humidity 0%-95% Non-Condensing
Output Nominal Voltage 120V
Output Receptacles (2) 5-15R
Receptacle Color White
High Voltage Transfer to Battery Power In AC "auto" mode, inverter / charger switches to battery mode as line voltages increases 135V (user adjustable to 145 -see manual)
Input Connection Type DC INPUT: set of two (2) DC bolt-down terminals. AC INPUT: NEMA 5-15R GFCI input plug
Material of Construction Polycarbonate
Transfer Time (Line Power to Battery Mode) 16.6 milliseconds (typical -compatible with many computers, servers and networking equipment -verify transfer time compatibility loads for UPS applications)
Recommended Electrical Service DC INPUT: Requires 12VDC input source capable of delivering 192A for the required Duration (when used at full continuous capacity- DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A 120VAC recommended.
Front Panel LEDs Set of (6) LEDs offer continuous status information on load percentage ( 6 levels reported) and battery charge level (7 levels reported) See manual for sequences
Nominal Input Voltage(s) Supported 120V AC
Outlet Details 2 NEMA 5-15R GFCI protected outlets
Switches 3 position on / off remote switch enables simple on / off power control plus "auto/ remote"
Voltage Compatibility (VDC) 12
Voltage Compatibility (VAC) 120
Pure Sine Wave Output No
Product Certifications CSA (Canada); UL 458
Overload Protection Includes 25A input breaker dedicated to the charging system and 20A output breaker for AC output loads
Output Frequency Regulation 60 Hz (+/- 0.3Hz)
Battery Charge 15A / 60A (selectable)
Output Voltage Regulation LINE POWER (AC): Maintains 120V nominal sine wave output from line Source. Inverter Power (AC) Maintains PWM sine wave output voltage of 120 VAC (+/- 5%)
Battery Pack Accessory (Optional) 98-121 sealed lead acid battery (optional)
Package Includes UT2012UL Inverter/Charger;APSRM4 Remote;Remote battery temperature sensor cable;Instruction manual with warranty information
Continuous Output Capacity (Watts) 2000

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare