Hot Water Circulating Pumps: How They Work and How to Choose
Hot water circulating pumps move water through a loop so cooled water goes back to the water heater instead of sitting in the pipes. A hot water circulating pump is the part that makes that loop work, and the control that starts it decides whether it saves water and energy or wastes them.
Key takeaways
- The pump sends cooled water back to the heater, so you wait less for hot water at the tap.
- Control type matters: a pump that runs all the time can use more energy than it saves.
- Before you order, match the Mfr #, the specifications and the fit with your water heater.
In this guide
- How a hot water recirculating pump works
- Types of hot water recirculating pumps
- How to choose a circulating pump for hot water
- Recirculating pump for water heater: tank or tankless
- Frequently asked questions
- The Bottom Line: Pick the Control Before the Pump
- Hot water circulating pumps: where to go from here
How a hot water recirculating pump works
A hot water recirculating pump connects to the hot water loop. In a demand loop, the U.S. Department of Energy says the pump returns any ambient-temperature water left sitting within the loop to the water heater. Without that return, the cooled water in the pipe usually runs down the drain while you wait for hot water to arrive.
That waiting adds up. DOE puts the waste at between 400 billion and 1.3 trillion gallons of water a year in US households. A hot water recirculation pump aims to cut a share of it.
Benefits of a hot water recirculation pump, and the limits
ENERGY STAR says demand hot water recirculating systems can save water and energy in some situations. The words "in some situations" matter. The result depends on how the pump is controlled and on the pipes it serves.
Pipes matter because heat escapes from them. The Building America Solution Center reports that uninsulated hot water pipes lose heat, and that the loss varies with climate. It also says adding pipe insulation can cut overall water heating energy use. That point is about pipe insulation in general, not about recirculation loops. See its guide to insulating plumbing pipes for the figures.
Pros
- Cooled water in the loop goes back to the water heater.
- Less water is wasted while you wait for hot water.
- Demand controls can save water and energy in some situations.
Cons
- A pump that runs continuously can use more energy than it saves.
- Heat is lost from uninsulated pipes, and the pump keeps those pipes warm.
- Savings depend on your plumbing and your controls, so they are not the same in every building.
Types of hot water recirculating pumps
When you shop for hot water recirculating pumps, the first difference is how each one is controlled. The second is what it needs from your plumbing. Product pages list both, so read them before you compare prices.
Hot water circulator pump or recirculating pump?
Listings use several names. A hot water circulator pump and a hot water recirculation pump can describe similar products, so do not rely on the name alone. Check what the product does, how it starts and stops, and what it connects to.
DOE has also published a final rule on energy conservation standards for circulator pumps, with compliance required from May 22, 2028. Whether a given model is covered is a question for the manufacturer's documentation.
| Control type | How it runs | What to know |
|---|---|---|
| Continuous | Runs without stopping | ENERGY STAR says continuous systems can use more energy than they save |
| Push button | Starts when you press a button | A demand control, which DOE recommends for running the pump |
| Timer | Starts on a set schedule | Listed by ENERGY STAR as a way to start a demand system |
| Motion sensor | Starts when it detects movement | Also listed by ENERGY STAR as a way to start a demand system |
Hot water recirculating pump with timer and other controls
ENERGY STAR says demand systems can be controlled by the push of a button, a timer, or a motion sensor. A hot water recirculating pump with timer fits a building with predictable hot water use. A button or motion sensor fits irregular use. You will also see thermostat-controlled models listed. Confirm from the specifications how a given model starts and stops.
Key point: DOE recommends demand-initiated controls to operate the pump.

How to choose a circulating pump for hot water
Start with the system you already have, not with the pump. A circulating pump for hot water has to match your plumbing, your water heater and the way people use hot water in the building. Our product pages show the Mfr #, specifications and availability so you can check each item against what is installed.
- Match the Mfr # to the pump you are replacing, if you have one.
- Check the control type: continuous, timer, push button or motion sensor.
- Read the product page to see whether the pump needs a dedicated return line.
- Compare the specifications with your application, such as connection size and voltage.
- Confirm that the pump is compatible with your water heater, tank or tankless.
- Confirm availability and price on the day you order.
- Review the shipping and return policies before you buy.
Shoppers often ask which hot water recirculating pump is the right one. No single pump suits every job. The right hot water recirculating pump for your job is the one whose controls, connections and specifications match your system. To compare options, browse more guides on our blog. For a different kind of pump decision, see our guide on how to choose engine driven pumps.
Not sure which pump fits?
Send the product name or Mfr # and tell us how you plan to use the pump.
Recirculating pump for water heater: tank or tankless
A recirculating pump for water heater use ties into the same loop that feeds your fixtures, so the water heater matters as much as the pump. Whether the heater is a tank or a tankless unit, check the water heater manufacturer's instructions on recirculation and the pump's listed compatibility before you order. Where a product page does not say, ask before you buy.
Installation involves plumbing and electrical work. Follow the pump manufacturer's instructions and local code, and use a qualified plumber when the job calls for one. This guide does not replace either.
One more point on temperature. The CDC advises setting a water heater at or above 120°F to limit the growth of Legionella. That guidance is written for vacation rentals, not for every plumbing system, so ask the water heater manufacturer or a plumber about the right setting for your building.

Frequently asked questions
Do hot water recirculating pumps really work?
They can. ENERGY STAR says demand hot water recirculating systems can save water and energy in some situations, and DOE says the pump returns cooled water to the heater. Results depend on your plumbing and your controls. A pump that runs continuously may use more energy than it saves.
Does a hot water recirculating pump use a lot of electricity?
It depends on how long it runs. ENERGY STAR notes that systems operating continuously can use more energy, because of pumping energy and heat lost from the pipes. Check the electrical specifications on the product page, and consider a timer or demand control.
Do I need a return line to install a hot water circulating pump?
It depends on the product. Some systems use a dedicated return line and others work differently. Read the product page and the manufacturer's instructions for what the pump needs. If you are unsure what your plumbing has, ask a qualified plumber.
Can I install a hot water recirculating pump myself?
Follow the manufacturer's instructions and local code, and use a qualified plumber when the job calls for one. We do not give installation steps in this guide. If you have a question about a specific product, use the contact form with the product name or Mfr #.
Which hot water recirculating pump should I choose?
No single pump fits every job. Match the control type, the connections and the specifications to your system and your water heater. Compare the options on the product pages and confirm availability before you order.
The Bottom Line: Pick the Control Before the Pump
- Choose the control first. Continuous operation can use more energy than it saves, and DOE recommends demand-initiated controls to run the pump.
- Do not trust the name alone. Circulator and recirculating pump listings can overlap, so read what the product does and how it connects.
- Check fit with your water heater. Confirm compatibility with a tank or tankless unit from the manufacturer's documents.
- Look at the pipes too. Heat loss from uninsulated pipes is real, and insulation works alongside a pump.
Hot water circulating pumps: where to go from here
Hot water circulating pumps are simple to describe and easy to choose wrong. Know your control type, your plumbing and your water heater, then match the Mfr # and specifications. Contractor Supplies lists those details on each product page. See our home page for other categories.
Orders are typically processed in 1 to 3 business days, and most deliveries arrive 3 to 7 business days after shipment. These are estimates and can change, so check the shipping policy for the details.
Have a question before you order?
Send the product name or Mfr # through the contact form.