Skip to content

Contractor Tools

3530 products

Filters

  • $4.06 - $4.06
    $4.06
    $7.40
    $7.40 - $7.40
    $7.40

    Mandrel, Coarse, 1/4-20, For Use With 5TUW5

    CONTRACTOR SELECT
    In stock

    Mfr # 5PWY5 Item Mandrel Application Replacement Riveter Accessory Used in with Rivet Tools to Efficientl...

    View full details
    $4.06 - $4.06
    $4.06
    $7.40
    $7.40 - $7.40
    $7.40
  • $34.80 - $34.80
    $34.80
    $80.75
    $80.75 - $80.75
    $80.75

    1.5 lb Hookaroon, 4-1/2 In Edge, 36 In L Hickory Handle

    COUNCIL TOOL
    In stock

    Mfr #: 150 - Forged Steel 1 1/2 pound head; 36" hickory wood handle - Axe head is hydraulically seated onto handle and secured with a serrated alu...

    View full details
    $34.80 - $34.80
    $34.80
    $80.75
    $80.75 - $80.75
    $80.75
  • $32.48 - $32.48
    $32.48
    $70.74
    $70.74 - $70.74
    $70.74

    Foam Conduit Piston, 4 In, Grey, PK2

    GARDNER BENDER
    In stock

    Mfr #: FC10 Foam line carrier for 4 in. conduit Designed for use with any type of blower or vacuum system Cleans water and debris from most condui...

    View full details
    $32.48 - $32.48
    $32.48
    $70.74
    $70.74 - $70.74
    $70.74
  • $132.82 - $132.82
    $132.82
    $274.79
    $274.79 - $274.79
    $274.79

    Manual Punch Driver Set, Capacity 10 ga, 10 piece

    GREENLEE
    In stock

    Mfr # 7235BB Capacity 10 ga. For Use With For Battery-Powered, Hydraulic and Ratchet Drivers ...

    View full details
    $132.82 - $132.82
    $132.82
    $274.79
    $274.79 - $274.79
    $274.79
  • $61.48 - $61.48
    $61.48
    $141.59
    $141.59 - $141.59
    $141.59

    Dustless Pro Hose Kit, 1.5"x 25 Ft.

    DUSTLESS TECHNOLOGIES
    In stock

    Mfr #: H0946 H0946 Features: -Cleans liquid and slurry from floor. -Works with the dustless pro industrial slurry vacuum. -Durable rubber squeegee...

    View full details
    $61.48 - $61.48
    $61.48
    $141.59
    $141.59 - $141.59
    $141.59
  • $52.78 - $52.78
    $52.78
    $158.39
    $158.39 - $158.39
    $158.39

    Cut-Off Blade

    MICRO 100
    In stock

    Mfr #: T-108 Double end " T" style cut-off tool that is parallel ground to help achieve a straighter cut Tops are hollow ground to help curl the c...

    View full details
    $52.78 - $52.78
    $52.78
    $158.39
    $158.39 - $158.39
    $158.39
  • $8.12 - $8.12
    $8.12
    $22.02
    $22.02 - $22.02
    $22.02

    Tweezer, Fine Tip, Curved, Economy

    EREM
    In stock

    EREM Inspection and Retrieving Tool — Stainless Steel Categorized under Inspection and Retrieving Tools, this inspection and retrieving tool is sel...

    View full details
    $8.12 - $8.12
    $8.12
    $22.02
    $22.02 - $22.02
    $22.02
  • $399.04 - $399.04
    $399.04
    $825.59
    $825.59 - $825.59
    $825.59

    Install Tool, Tangless Gage Style, 2-56

    STANLEY ENGINEERED FASTENING
    In stock

    STANLEY ENGINEERED FASTENING Fastening Tool Categorized under Fastening Tools, this fastening tool is selected for practical installation and ongoi...

    View full details
    $399.04 - $399.04
    $399.04
    $825.59
    $825.59 - $825.59
    $825.59
  • $31.32 - $31.32
    $31.32
    $77.63
    $77.63 - $77.63
    $77.63

    1/2" 5 Piece Indexable Carbide Turning Tool Set

    HHIP
    In stock

    HHIP Indexable Tool This indexable tool belongs to the Indexable Tools category and is built for dependable day-to-day use. A straightforward optio...

    View full details
    $31.32 - $31.32
    $31.32
    $77.63
    $77.63 - $77.63
    $77.63
  • $0.00 - $0.00
    $0.00
    $20.75
    $20.75 - $20.75
    $20.75

    Inspection Mirror, LED, 1-3/8x 6-1/2 to 35

    ULLMAN
    In stock

    Mfr # HTE-2LT Item Inspection Mirror Type LED Lighted Telescoping Number of Pieces ...

    View full details
    $0.00 - $0.00
    $0.00
    $20.75
    $20.75 - $20.75
    $20.75
  • $0.00 - $0.00
    $0.00
    $13.38
    $13.38 - $13.38
    $13.38

    Handle Magnet, Steel, 50 lb, 2Lx3/4Wx2H

    CONTRACTOR SELECT
    In stock

    Mfr # 7213 Item Handle Magnet Magnet Material Ceramic 5 Max. Lifting Capacity 50 lb...

    View full details
    $0.00 - $0.00
    $0.00
    $13.38
    $13.38 - $13.38
    $13.38
  • $74.82 - $74.82
    $74.82
    $149.99
    $149.99 - $149.99
    $149.99

    5C Indexing Spin Jig

    HHIP
    In stock

    Mfr #: 3900-1604 Utilizes 5C collets to 1-1/8" . Utilizes 5C collets to 1-1/8" Hardened and ground spindle. 0.0004 T.I.R. spindle accuracy Utilize...

    View full details
    $74.82 - $74.82
    $74.82
    $149.99
    $149.99 - $149.99
    $149.99
  • $261.58 - $261.58
    $261.58
    $433.19
    $433.19 - $433.19
    $433.19

    Engraving Pen, 1.1 CFM, 13500 BPM

    CHICAGO PNEUMATIC
    In stock

    Mfr #: CP9361 Speed and Power: With a remarkable 13,500 blows per minute, this compact tool delivers swift and precise engraving on various surfac...

    View full details
    $261.58 - $261.58
    $261.58
    $433.19
    $433.19 - $433.19
    $433.19
  • $183.28 - $183.28
    $183.28
    $337.19
    $337.19 - $337.19
    $337.19

    Sledge Hammer, 12 lb., 32 In, Fiberglass

    AMERICAN HAMMER
    In stock

    AMERICAN HAMMER Hammers and Striking Tool This hammers and striking tool belongs to the Hammers and Striking Tools category and is built for depend...

    View full details
    $183.28 - $183.28
    $183.28
    $337.19
    $337.19 - $337.19
    $337.19
  • $22.62 - $22.62
    $22.62
    $48.78
    $48.78 - $48.78
    $48.78

    Spatula, Stiff, 1", Aluminum Bronze

    AMPCO SAFETY TOOLS
    In stock

    ASIN reference: B0007WXLR0 Barcode/UPC/EAN: 702535884000 Recommended for maintenance and repair workflows. designed to support reliable operati...

    View full details
    $22.62 - $22.62
    $22.62
    $48.78
    $48.78 - $48.78
    $48.78
  • $55.68 - $55.68
    $55.68
    $113.63
    $113.63 - $113.63
    $113.63

    Sledge Hammer, 2 lb., 12 In, Fiberglass

    AMERICAN HAMMER
    In stock

    AMERICAN HAMMER Hammers and Striking Tool This hammers and striking tool belongs to the Hammers and Striking Tools category and is built for depend...

    View full details
    $55.68 - $55.68
    $55.68
    $113.63
    $113.63 - $113.63
    $113.63
  • $5.22 - $5.22
    $5.22
    $13.43
    $13.43 - $13.43
    $13.43

    Brush Service 120V

    MILWAUKEE TOOL
    In stock

    Barcode/UPC/EAN: 045242014989 Notes: Confirm fit, compatibility, and any site-specific requirements prior to ordering or installation.

    $5.22 - $5.22
    $5.22
    $13.43
    $13.43 - $13.43
    $13.43
  • $0.00 - $0.00
    $0.00
    $10.43
    $10.43 - $10.43
    $10.43

    Pick-Up Tool, Mag, Flex, 21-9/16 In, 1.5 lb

    ULLMAN
    In stock

    ULLMAN Inspection and Retrieving Tool — Neodymium-Iron-Boron Extra High Flux Magnet, Aluminum Shaft In the Inspection and Retrieving Tools category...

    View full details
    $0.00 - $0.00
    $0.00
    $10.43
    $10.43 - $10.43
    $10.43
  • $39.44 - $39.44
    $39.44
    $77.99
    $77.99 - $77.99
    $77.99

    Round Punch/Die Set

    METALPRO
    In stock

    ASIN reference: B0026GOPIY Barcode/UPC/EAN: 617550080101 Recommended for maintenance and repair workflows. intended for professional buyers foc...

    View full details
    $39.44 - $39.44
    $39.44
    $77.99
    $77.99 - $77.99
    $77.99
  • $0.00 - $0.00
    $0.00
    $157.19
    $157.19 - $157.19
    $157.19

    Mag Pickup, w/Release, 36 to 40-1/4 In, 8lb

    MAG-MATE
    In stock

    Mfr #: MM3600EZ Quick Cleaning: The Mag-Maid magnetic pickup tool is your safety solution for cleaning sharp metal chips, separating small parts, ...

    View full details
    $0.00 - $0.00
    $0.00
    $157.19
    $157.19 - $157.19
    $157.19
  • $40.02 - $40.02
    $40.02
    $81.47
    $81.47 - $81.47
    $81.47

    Back-Out Punch, w/ Handle, 7/8 x 15 In L

    COUNCIL TOOL
    In stock

    Mfr #: BO875 Price For: Each Item: Back-Out Punch Function: Used For Driving Out Bolts, Rivets, And Pins Type: w/ Handle Features: 15" Hickory Wo...

    View full details
    $40.02 - $40.02
    $40.02
    $81.47
    $81.47 - $81.47
    $81.47
  • $18.56 - $18.56
    $18.56
    $40.31
    $40.31 - $40.31
    $40.31

    Cross Pein Hammer, 3 lb., 15 In, Hickory

    VAUGHAN
    In stock

    VAUGHAN Hammers and Striking Tool This hammers and striking tool belongs to the Hammers and Striking Tools category and is built for dependable day...

    View full details
    $18.56 - $18.56
    $18.56
    $40.31
    $40.31 - $40.31
    $40.31
  • $96.86 - $96.86
    $96.86
    $218.39
    $218.39 - $218.39
    $218.39

    Sledge Hammer, 12 lb., 38 In, Rubber/Steel

    WILTON
    In stock

    Mfr #: 21236 Patented hi-vis, drop-forged 46 HRC head endures the most demanding applications Unbreakable Handle Technology steel core eliminates ...

    View full details
    $96.86 - $96.86
    $96.86
    $218.39
    $218.39 - $218.39
    $218.39
  • $4.64 - $4.64
    $4.64
    $9.78
    $9.78 - $9.78
    $9.78

    Drop-in Anchor Setting Tool, 3/8 In

    RED HEAD
    In stock

    RED HEAD Fastening Tool In the Fastening Tools category, this fastening tool supports consistent performance for routine use. Selected for dependab...

    View full details
    $4.64 - $4.64
    $4.64
    $9.78
    $9.78 - $9.78
    $9.78

About Contractor Tools

Hand tools, power tools, pneumatic equipment, and measuring instruments for professional contractors. From cordless impact drivers to precision layout tools, every item is sourced for jobsite durability. Working on drywall? Our step-by-step guide on professional drywall repair covers the exact tools and technique for a clean finish.

Tools and accessories for contractors, technicians, installers, and maintenance crews.

The Contractor Tools collection is organized for real jobsite use: drilling, cutting, fastening, measuring, shaping, pulling, scraping, finishing, and repair. Use this hub to browse major tool groups, then move into specific products based on the material, tool compatibility, size range, and task requirements.

What you can find in this collection

  • Drill bits, cutters, taps, dies, and machining accessories
  • Hand tools and measuring tools
  • Power tool accessories and replacement parts
  • Concrete, masonry, drywall, flooring, and finishing tools

How to choose the right products

  • Match the tool to the material being worked: metal, concrete, masonry, wood, drywall, tile, or plastic.
  • Check shank style, cutting diameter, length, capacity, and compatible equipment.
  • Choose individual replacements for exact sizes or sets when crews need wider coverage.

Common applications

  • Construction crews
  • Installation teams
  • Maintenance technicians
  • Repair and service contractors

Related categories

Product examples

These links point to individual product pages so customers and search engines can move from the category hub into specific items.

The 22 in Spring Brace Leaf Rake, 24 Tines, 48 in L Hardwood Handle from Seymour Midwest has a 22 in. head and a 48 in. hardwood handle. The Top Products collection lists a rotary hammer kit, an abrasive cut-off machine and an insulated screwdriver and nutdriver set, among other items. The Pinch Bars, Pinch Point Bar, 66-1/4 In. L from True Temper is a black steel pinch point bar with a 1 1/2 in. bar width and a round tapered handle.

Frequently asked questions

How should I compare contractor tools products?

Compare the application, material, size, rating, compatibility, manufacturer part number, and package quantity before ordering. For replacement parts, always check the product page specifications against the original part.

Why is this collection useful?

A well-structured collection page helps buyers narrow a large product catalog into relevant categories and product pages. It also gives search engines clearer context about how products relate to the broader category.

Contractor tools and jobsite accessories

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare