1/3 HP PP Magnetic Drive Pump 208-230/460V 1" FNPT

Finish Thompson — Magnetic Drive Pumps — 1/3 HP PP Magnetic Drive Pump 208-230/460V 1" FNPT

A practical Magnetic Drive Pumps by Finish Thompson intended for repeatable results in shop, facility, and field workflows.

Quick specs

• Application: Acids, Caustics, DI-Water, Plating Solutions
• GPM of Water @ 18 Ft. of Head: 31 gpm
• Bearing Type: Radial, Thrust
• Length: 17 13/32 in
• Manufacturer Part Number: DB6P-M225
• UPC: -

Product information

• Country of Origin: United States
• Manufacturer Part Number: DB6P-M225
• UPC: -

Dimensions

• Overall Width: 7.5 in
• Discharge Pipe Size: 1 in
• Length: 17 13/32 in
• Width: 7 1/2 in
• Height: 8 19/64 in
• Intake Pipe Size: 1 in
• Overall Height: 8.3 in
• Manufacturers Warranty Length: 5 yr
• Overall Length: 17.4 in

Details

• Flow Rate @ 3 ft of Head (Maximum): 39 gpm
• Horsepower (Maximum): 1/3 hp
• Flow Rate @ 18 ft of Head (Maximum): 31 gpm
• Motor Mounting Type: Horizontal
• Priming: Manual
• Motor Speed (Maximum): 3,450 RPM
• Flow Rate @ 6 ft of Head (Maximum): 39 gpm
• Discharge Pipe Type: MNPT
• Operating Pressure (Maximum): 14.2 psi
• Phase: Three
• Specific Gravity (Maximum): 1.8
• Viscosity (Maximum): 100 cps
• Chemical Compatibility: Deionized Water
• Intake Pipe Type: FNPT
• Application: Acids, Caustics, DI-Water, Plating Solutions
• GPM of Water @ 18 Ft. of Head: 31 gpm
• Bearing Type: Radial, Thrust
• GPM of Water @ 24 Ft. of Head: 23 gpm
• Motor Type: Induction
• Full Load Amps: 1.22-1.20/.60
• Design: Centrifugal
• Motor Enclosure: Totally Enclosed Fan Cooled
• GPM of Water @ 6 Ft. of Head: 39 gpm
• GPM of Water @ 15 Ft. of Head: 34 gpm
• Max. Specific Gravity: 1.2
• Mounting: Horizontal
• GPM of Water @ 3 Ft. of Head: 39 gpm
• Gasket Material: Viton
• Impeller Material: Polypropylene
• Max. Viscosity: 100 cps

This Magnetic Drive Pumps is well-suited for replacement, upgrade, and stock-room use.

Recommended for field service tasks and on-site replacement and a practical option for maintenance teams and procurement.

Highlights

• Suitable for maintenance, repair, and project-based procurement.
• Helps keep specifications consistent across replacements and replenishment cycles.
• Designed for professional use where predictable fit and handling are important.
• Works well in standardized part lists and preventative maintenance schedules.

Notes: Review application constraints and installation requirements to ensure the part meets your needs.