Aisle Marking Tape, Solid, Purple, 2" W
Original price
$4.36
-
Original price
$4.36
Original price
$4.36
$4.36
-
$4.36
Current price
$4.36
- Mfr #: VM102PU
- Combination Transmitter and Receiver | Compatible with Nikon TTL System | 2.4 GHz Operating Frequency | 16 Channels, 3 Groups | High-Speed Sync to 1/8000 sec | 1/128 to 1/1 Manual Output | +/- 3 Stops in TTL | Runs on 2 Separately-Purchased AAs
- MOUNTING: Mount the Transceiver to your camera for control of the macro system via its TTL foot and mount a compatible strobe to the transceiver via its upper hot shoe.
- SPEEDLIGHT COMPATIBILITY: Besides triggering and controlling the Macro Ring Flash via its built-in receiver, the Transceiver can also be used with a VM-1020 Speedlight. However, since the VM-1020 flash does not have a compatible built-in receiver, a Transceiver is needed for each Nikon flash unit
- TRIGGERING STUDIO STROBES: Using the transceiver's 2.5mm sync port, you can set up and use off-camera strobes by using one transceiver as trigger and another as a wireless receiver. Fire studio strobes with fewer cables in the way
- LED FOCUS ASSIST/FLASH TEST: The LED focus assist/flash test is a great way to help your camera focus and confirm everything is working correctly with your flash setup. Fire all the flashes at the same time to verify your flashes are working properly. Alternatively, you can use the LEDs as modeling lights to preview the lighting from the VM-1010 flash. This gives you one-button ease to check your rig
- TRIGGERING AND CONTROL FROM 328’ AWAY: The Transceiver allows you to trigger the flash off-camera at distances up to 328'. The transceiver has 16 channels and 3 groups whose power and ratios between them can be adjusted
- SLEEP MODE: Sleep mode allows the transceiver to power down and save battery power after being idle. This will ensure you won't waste any juice, so you can keep shooting. Waking the system is as easy as the press of a button