Epoxy Adhesive, DP270 Series, Clear, 1:01 Mix Ratio, 3 hr Functional Cure, Dual-Cartridge

3M — Epoxy & Structural Adhesives — Epoxy Adhesive, DP270 Series, Clear, 1:01 Mix Ratio, 3 hr Functional Cure, Dual-Cartridge

3M Epoxy & Structural Adhesives built for consistent performance in maintenance, inspection, and replacement work.

Quick specs

• Color: Gray
• Includes: Resin and Hardener
• Application: Bonding, Potting
• Size: 1.64 oz
• Manufacturer Part Number: 270
• UPC: 00638060089736

Product information

• UPC: 00638060089736
• Country of Origin: United States
• Manufacturer Part Number: 270

Dimensions

• Size: 1.64 oz

Details

• Series: DP270
• Coverage: 320 sq ft/gal
• Shear Strength (PSI): 2450 to 2500
• Epoxy Color: Clear
• Green Environmental Attribute: Does Not Contain Methylene Chloride
• Structural Adhesive Type: Epoxy Adhesive
• Work Life: 75 min
• Epoxy Container: Dual-Cartridge
• Temp. Range (F): 0 Degrees to 72 Degrees
• For Use With: 3M(TM) Dispensing Equipment
• Includes: Resin and Hardener
• Application Method: No Special Application
• Resin Type: Epoxy
• Maximum Viscosity: 16,000 cps
• Standards: UL 94 HB
• Peel Strength: 2 lb/in
• Maximum Application Temperature: 80 Degrees F
• Water Resistance: Not Water-Resistant
• Cure Method: Ambient
• Interior/Exterior: Interior/Exterior
• Minimum Viscosity: 6,000 cps
• Included Components: Resin and Hardener
• Total Volume: 48.5 mL
• Low Odor: No
• Materials Bonded: Composite, Metal, Plastic, Rubber, Wood
• Non-Sagging: No
• Compatible Applicator (Grainger Part Number): 54XK02
• Compatible Mixer Tip: 3M EPX
• Primary Applications: Potting
• Full Cure Time: 48 hr
• Tensile Strength: 2,450 to 2,500 psi
• VOC Content Weight: Less Than 10 g/L
• Marine Grade: No
• Minimum Application Temperature: 0 Degrees F
• Compatible Applicator: 3M EPX
• Hardness at Full Cure: 83 Shore D
• Maximum Performance Temperature: 180 Degrees F
• Cured Color: Clear
• Application: Bonding, Potting
• Color: Gray
• For Use On: 3M(TM) Dispensing Equipment
• Container Type: Dual-Cartridge
• Functional Cure: 3 hr
• Full Cure: 48 hr
• Mixing Ratio: 1:01
• Shear Strength: 2,500 psi
• Temp. Range: 0 Degrees to 72 Degrees
• Working Time: 1 hr

This Epoxy & Structural Adhesives is selected for dependable day-to-day use.

Recommended for inventory replenishment and standardization and well-suited for replacement, upgrade, and stock-room use.

Highlights

• Suitable for maintenance, repair, and project-based procurement.
• Helps keep specifications consistent across replacements and replenishment cycles.
• Designed for professional use where predictable fit and handling are important.
• Works well in standardized part lists and preventative maintenance schedules.

Notes: Verify measurement standards, tolerances, and compatibility with existing assemblies before purchase.