Hand Drum Pump, Rotary, PP Adptr, 3/4in Dia

LIQUIDYNAMICS — Hand Drum Pumps — Hand Drum Pump, Rotary, PP Adptr, 3/4in Dia

LIQUIDYNAMICS Hand Drum Pumps built for consistent performance in maintenance, inspection, and replacement work.

Quick specs

• Features: Check Valve, Dispenses 10 gal Per 100 Revolutions
• Includes: 37 in Suction Tube, Spout Cap
• Gasket Material: EPDM
• For Container Size: 55 gal, 275 gal, 330 gal
• Manufacturer Part Number: 10035
• UPC: -

Product information

• Country of Origin: Italy
• Manufacturer Part Number: 10035
• UPC: -

Dimensions

• Hose Length: 96 in
• Hose Inside Dia.: 3/4 in
• Height Above Container: 16 in
• Spout Length: 3 in
• Hose Outside Dia.: 1 in
• For Container Size: 55 gal, 275 gal, 330 gal
• Adapter Dia.: 3/4"
• Manufacturers Warranty Length: 30 days
• Suction Tube Length: 37 in
• Inlet Size: 3/4"

Details

• Features: Check Valve, Dispenses 10 gal Per 100 Revolutions
• Agency Compliance: ISO 22241-3
• Includes: 37 in Suction Tube, Spout Cap
• Self-Priming: No
• Max. Flow GPM: 10
• Motor RPM: Depends on Fluid Viscosity
• Includes Discharge Hose: Yes
• Duty Cycle: Continuous
• For Container Type: Drum, Tote
• Min. Operating Temp.: 17 Degrees F
• Discharge Connection Type: BSP
• Pump Connection ID: 1 in
• Max. Oil Flow: 13 oz per stroke
• Not Recommended Chemicals: Acetic Acid (Glacial), Acetic Acid 80%, Acetone, Ammonia (Liquids), Anhydrous Ammonia, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Cyclohexane, Diesel Fuel, E85, Ethyl Acetate, Fertilizers, Formic Acid, Fungicides, Gasoline, Heptane, Herbicides, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrazine, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Kerosene, Lacquer Thinners, Lithium Grease, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Motor Oil, Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint, Paint Thinner, Pesticides, Phosphoric Acid (40% Solution), Sodium Bisulfate, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene See More
• Food Grade: No
• Spout Material: 316 Stainless Steel
• Includes Spout: Yes
• Pump Connection OD: 3/4 in
• Compatible Chemicals: Acetic Acid 20%, Ammonium Hydroxide, Antifreeze (Coolant), Citric Acid 50%, DEF, Deionized Water, Ethyl (Ethanol), Ethylene Glycol, Formaldehyde, Formaldehyde 40%, Fresh Water, Glycerin, Isopropyl (Isopropanol), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfite, Sodium Hypochlorite/Bleach (to 20%)
• Gasket Material: EPDM
• Metered: No

This Hand Drum Pumps is designed to support reliable operation in demanding environments.

Recommended for planned maintenance programs and chosen for predictable fit and professional handling.

Highlights

• Suitable for maintenance, repair, and project-based procurement.
• Helps keep specifications consistent across replacements and replenishment cycles.
• Designed for professional use where predictable fit and handling are important.
• Works well in standardized part lists and preventative maintenance schedules.

Notes: Verify measurement standards, tolerances, and compatibility with existing assemblies before purchase.