High Adhesion, Instant Seal Flange Sealant, 300 mL, Black, Temp Range -65 to 500 Degrees F

LOCTITE — Gasket Sealants & Makers — High Adhesion, Instant Seal Flange Sealant, 300 mL, Black, Temp Range -65 to 500 Degrees F

A practical Gasket Sealants & Makers by LOCTITE intended for repeatable results in shop, facility, and field workflows.

Quick specs

• Color: Black
• Application: E.G. Timing Covers, Oil Sumps, Stamped Sheet Metal Covers
• Substrates: Ceramics, Glass, Metals, Variety Of Plastic Substrates
• Size: 300 mL
• Manufacturer Part Number: 212184
• UPC: 079340201668

Product information

• Manufacturer Part Number: 212184
• UPC: 079340201668
• Country of Origin: United States

Dimensions

• Container Size: 10.14 fl oz
• Maximum Gap Fill Size: 0.25 in
• Size: 300 mL

Details

• Substrates: Ceramics, Glass, Metals, Variety Of Plastic Substrates
• Temp. Range: -65 to 500 Degrees F
• For Use On: Makes High Performance, Leakproof Gaskets in one Minute. Equipment Can be Returned to Service Immediately. Blowout Resistant. Outperforms Precut Gaskets
• Sealant Container: Cartridge
• Item: RTV Gasket Maker
• Type: High Adhesion, Instant Seal
• Full Cure: 24 hr
• Begins to Harden: Tack Free: 20 min
• Specific Gravity: 1.31 @ 20 Degrees C
• Flash Point: 199.4 Degrees F
• Standards: California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA
• Viscosity: paste
• Characteristics: Fills Gaps to 0.250 in, Low Odor, Low Volatiility, Non-Corrosive, Provides Instant Seal and Fluid Resistance
• Container Type: Cartridge
• Chemical Base: Oxime Silicone
• Tensile Strength: 1.7 N/sq mm
• VOC Content: 44.47 g/L
• Resistance Properties: Oil Resistant
• Working Time: 15 min
• For Fluid Type: Oil
• Hardness: Shore A31 to A46
• Maximum Operating Temperature: 400 Degrees F
• Storage Requirements: 8 Degrees to 21 Degrees C
• Full Cure Time: 1 day
• Sealant Type: Gasket Sealant
• Cure Type: Room Temperature
• Product Form: Paste
• Series: SI 5900
• Shear Strength: 145 psi
• For Material Type: Metal, Plastic
• Sensor Safe: No
• Minimum Operating Temperature: -65 Degrees F
• Application: E.G. Timing Covers, Oil Sumps, Stamped Sheet Metal Covers
• Color: Black

This Gasket Sealants & Makers is well-suited for replacement, upgrade, and stock-room use.

Recommended for field service tasks and on-site replacement and selected for dependable day-to-day use.

Highlights

• Suitable for maintenance, repair, and project-based procurement.
• Helps keep specifications consistent across replacements and replenishment cycles.
• Designed for professional use where predictable fit and handling are important.
• Works well in standardized part lists and preventative maintenance schedules.

Notes: Confirm fit, compatibility, and any site-specific requirements prior to ordering or installation.