Hot Melt Adhesive, Clear, 1/2 in Diameter, 12 in Length, 40 sec Begins to Harden

3M — Hot Melt Adhesives — Hot Melt Adhesive, Clear, 1/2 in Diameter, 12 in Length, 40 sec Begins to Harden

3M Hot Melt Adhesives built for consistent performance in maintenance, inspection, and replacement work.

Quick specs

• Material: Acrylic, Ceramic, Foam, Glass, Plastic
• Color: Gray
• Features: 100% Solids, Impact Resistant, Resilience for A Long-Lasting Bond, Thermoplastic
• Length: 12 in
• Manufacturer Part Number: 3764
• UPC: 00021200825972

Product information

• Country of Origin: United States
• Manufacturer Part Number: 3764
• UPC: 00021200825972

Dimensions

• Diameter - Glue Sticks: 1/2 in
• Diameter: 1/2 in
• Length: 12 in
• Size: 1/2 in x 12 in
• Length - Glue Sticks: 12 in

Details

• Features: 100% Solids, Impact Resistant, Resilience for A Long-Lasting Bond, Thermoplastic
• Minimum Viscosity: 6,000 cps
• UV Resistant: No
• Material: Acrylic, Ceramic, Foam, Glass, Plastic
• Container Type: Dual-Cartridge
• Begins to Harden - Adhesives: 40 sec
• Materials Bonded: Acrylic, Ceramic, Foam, Glass, Plastic
• Working Time: 40 sec
• Melting Temperature: 350 Degrees to 385 Degrees F
• Begins to Harden: 40 sec
• Color: Gray
• Electrically Insulating: No
• High Tack: No
• Series: 3764
• For Use With: Mfr. No. AE II
• Substrates: Polycarbonate, Polyethylene, Polypropylene
• Shear Strength: 390 psi
• Full Cure: 24 hr
• Peel Strength: 14 psi
• Melting Temp. - Glues: 140 Degrees F
• Temp. Range: 350 Degrees to 385 Degrees
• Application: Assembly, Attaching, Securing, Repairing, Potting, Panel bonding, Wire Tacking, Bundling, Sealing, Encapsulating, Rigidizing, Gluing, Packaging
• Tensile Strength: 650 psi
• Characteristics: Good Impact Resistance
• Sealant Base: Thermoplastic Resin
• Green Environmental Attribute: Does Not Contain Methylene Chloride
• Maximum Performance Temperature: 170 Degrees F
• Low Odor: No
• Primary Applications: Plastics
• Minimum Performance Temperature: -20 Degrees F
• Pressure Sensitive: No
• Maximum Viscosity: 6,000 cps
• Full Cure Time: 24 hr
• Product Format: Smooth Sticks
• FDA Compliance: 21 CFR 175.105
• Open Time: 40 sec

This Hot Melt Adhesives is intended for professional buyers focused on durability and uptime.

Recommended for facility operations and routine servicing and chosen for predictable fit and professional handling.

Highlights

• Clear specification formatting helps reduce ordering mistakes.
• Organized for straightforward purchasing and stocking.
• Suitable for maintenance, repair, and project-based procurement.
• Helps keep specifications consistent across replacements and replenishment cycles.

Notes: Confirm fit, compatibility, and any site-specific requirements prior to ordering or installation.