Hydronic Circulating Pump, 1/15 hp, 115V, 1 Phase, Flange Connection

Bell & Gossett — Hot Water Circulating Pumps — Hydronic Circulating Pump, 1/15 hp, 115V, 1 Phase, Flange Connection

A practical Hot Water Circulating Pumps by Bell & Gossett intended for repeatable results in shop, facility, and field workflows.

Quick specs

• Drive Type: Direct
• Pump Mount: Noryl(R)
• Best Efficiency GPM @ Head: 15 gpm @ 8 ft
• Overall Length: 6.19 in
• Manufacturer Part Number: 103418LF
• UPC: 683328225395

Product information

• Country of Origin: United States
• Manufacturer Part Number: 103418LF
• UPC: 683328225395

Dimensions

• For Inlet Pipe Diameter: 3/4 in, 1 in, 1 1/4 in, 1 1/2 in
• For Discharge Pipe Diameter: 3/4 in, 1 in, 1 1/4 in, 1 1/2 in
• Inlet/Outlet Size: 3/4 in to 1-1/2 in
• Face to Face Dimension: 6 3/8 in
• Overall Length: 6.19 in
• Compatible Discharge Pipe Size: 3/4 in, 1 in, 1 1/4 in, 1 1/2 in
• Manufacturer Warranty Length: 3 yr
• Compatible Intake Pipe Size: 3/4 in, 1 in, 1 1/4 in, 1 1/2 in
• Overall Width: 5.13 in
• Overall Height: 6.38 in

Details

• Shut-Off: 18 1/2 ft
• Shaft Material: No Mechanical Seal
• Mechanical Seal: 3-Speed Motor, Maintenance Free, Wet-Rotor
• Standards: CSA Certified, UL Listed
• For Use With Potable Systems: Yes
• Frequency: 60 Hz
• Maximum Flow Rate @ 5 Feet of Head: 18 gpm
• Maximum Flow Rate @ 50 Feet of Head: [DELETE]
• Maximum RPM: 2,950 RPM
• Maximum Media Temperature: 225 Degrees F
• Nameplate Voltage: 115V AC
• Maximum Flow Rate @ 10 Feet of Head: 13 gpm
• Series Family: NBF
• Maximum Operating Pressure: 150 psi
• Pump Housing Material: Bronze
• Compatible Media Type: Water
• Flange or Union Included: No
• Maximum Flow Rate @ 15 Feet of Head: 5 gpm
• Rotor Type: Wet
• Maximum Flow Rate @ 1 Feet of Head: 24 gpm
• Operating Pressure - Maximum: 150 psi
• For Low Lead Compliance Level: CE
• Drive Type: Direct
• Pump Mount: Noryl(R)
• Best Efficiency GPM @ Head: 15 gpm @ 8 ft
• Impeller Material: Plastic
• Loop Configuration: Open
• Amps: 1.10 A

This Hot Water Circulating Pumps is intended for professional buyers focused on durability and uptime.

Recommended for field service tasks and on-site replacement and designed to support reliable operation in demanding environments.

Highlights

• Suitable for maintenance, repair, and project-based procurement.
• Helps keep specifications consistent across replacements and replenishment cycles.
• Designed for professional use where predictable fit and handling are important.
• Works well in standardized part lists and preventative maintenance schedules.

Notes: Confirm fit, compatibility, and any site-specific requirements prior to ordering or installation.