Instant Adhesive Kit, HY 4070 Series, Light Yellow, 11 g, Dual-Cartridge

LOCTITE — Instant Adhesives — Instant Adhesive Kit, HY 4070 Series, Light Yellow, 11 g, Dual-Cartridge

LOCTITE Instant Adhesives built for consistent performance in maintenance, inspection, and replacement work.

Quick specs

• Color: White
• Features: Impact Resistant, Used Where Complete Cure of Excess Adhesive and Moisture Resistance Is Required
• Includes: (4) Mixing Nozzles, Plunger
• Container Size: 11 mL
• Manufacturer Part Number: 2264448
• UPC: 079340011717

Product information

• Country of Origin: Ireland
• Manufacturer Part Number: 2264448
• UPC: 079340011717

Dimensions

• Container Size - Adhesives: 11 g
• Container Size: 11 mL

Details

• Maximum Performance Temperature: 250 Degrees F
• Peel Strength: 2.9 lb/in
• Low Odor: No
• Cure Method: Ambient
• Cured Color: Clear
• Marine Grade: No
• Included Components: Resin and Hardener
• Full Cure Time: 7 day
• Hardness at Full Cure: 65 Shore D
• Weight: 19 oz
• Color: White
• VOC Content Weight: 20 g/L
• Series: HY 4070
• Adheres To: Metal, Rubber, Plastics
• Tensile Strength: 2,117 psi
• Functional Cure: 24 hr
• Chemical Type: Cyanoacrylate
• Gap Fill: 0.1 in
• Full Cure: 7 day
• Temp. Range: -104 Degrees to 248 Degrees
• Adhesive Color: Light Yellow
• Characteristics: Includes (4) Mixing Nozzles, Used Where Complete Cure of Excess Adhesive and Moisture Resistance is Required
• Viscosity: 1 to 30 cPs, 200 to 1300 cPs
• Standards: 29 CFR 1910.1200
• Features: Impact Resistant, Used Where Complete Cure of Excess Adhesive and Moisture Resistance Is Required
• Non-Sagging: Yes
• Hardener Color: Clear
• Interior/Exterior: Interior/Exterior
• Resin Color: Yellow
• Minimum Viscosity: 200 cps
• Mixing Ratio: 10:1
• For Use With: Mixing Tip
• Resin Type: Acrylic
• Compatible Accelerator: Loctite SF 712
• Application Method: No Special Application
• Minimum Application Temperature: -104 Degrees F
• VOC Content Weight Percentage: 2%
• Maximum Viscosity: 1,300 cps
• Water Resistance: Water-Resistant
• Maximum Application Temperature: 248 Degrees F
• Includes: (4) Mixing Nozzles, Plunger
• Primary Applications: Plastics
• Shear Strength: 3,625 psi
• Total Volume: 11 mL

This Instant Adhesives is intended for professional buyers focused on durability and uptime.

Recommended for planned maintenance programs and selected for dependable day-to-day use.

Highlights

• Helps keep specifications consistent across replacements and replenishment cycles.
• Designed for professional use where predictable fit and handling are important.
• Works well in standardized part lists and preventative maintenance schedules.
• Clear specification formatting helps reduce ordering mistakes.

Notes: Review application constraints and installation requirements to ensure the part meets your needs.