Inverter, Polycarbonate Case, Sine Wave Form, 1250W Nominal Output, 230V Output Voltage, 2 Outlets

TRIPP LITE — Power Inverters — Inverter, Polycarbonate Case, Sine Wave Form, 1250W Nominal Output, 230V Output Voltage, 2 Outlets

Designed for professional use, this TRIPP LITE Power Inverters helps keep parts and tooling consistent across routine service tasks.

Quick specs

• Product Series: APS X
• Input Voltage: 12 V DC
• Product Name: PowerVerter APS X Series 1250W Charger Inverter
• Width: 8-3/4"
• Manufacturer Part Number: APSX1250
• UPC: 037332121660

Product information

• Manufacturer Part Number: APSX1250
• UPC: 037332121660
• Country of Origin: China

Dimensions

• Unit Dimensions (hwd / in.): 7.000 x 8.750 x 9.000
• Width: 8-3/4"
• Depth: 9"
• Height: 7"

Details

• Form Factors Supported: Mounting slots enable permanent placement of APSX1250 on any horizontal surface (see manual for additional mounting information)
• Output Receptacles: (2) Universal outlets
• Front Panel LEDs: Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
• Battery Charge: Selectable 7.5 / 30A with 1/2 cycle transfer time
• DC System Voltage (VDC): 12
• Transfer Time (Line Power to Battery Mode): 10 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications)
• Recommended Electrical Service: DC INPUT: Requires 12VDC input source capable of delivering 125A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 225A minimum battery system fusing is recommended. AC INPUT: 230VAC See More
• Output Voltage Regulation: LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%).
• Nominal Output Voltage(s) Supported: 230V
• High Voltage Transfer to Battery Power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 272V
• Output Frequency Regulation: 50 Hz (+/- 0.3 Hz)
• Relative Humidity: 0%-95% Non-Condensing
• Maximum Input Amps / Watts: DC INPUT: Full continuous load - 125A at 12VDC. AC INPUT: 9.3A at 230VAC with full inverter and charger load (3.3A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions) See More
• Voltage Compatibility (VDC): 12
• Product Series: APS X
• Input Voltage: 12 V DC
• Product Name: PowerVerter APS X Series 1250W Charger Inverter
• Output Voltage: 230 V AC
• Package Contents: PowerVerter APS X Series 1250W Charger Inverter, Instruction Manual with Warranty Information
• Material of Construction: Polycarbonate

This Power Inverters is chosen for predictable fit and professional handling.

Recommended for planned maintenance programs and chosen for predictable fit and professional handling.

Highlights

• Designed for professional use where predictable fit and handling are important.
• Works well in standardized part lists and preventative maintenance schedules.
• Clear specification formatting helps reduce ordering mistakes.
• Organized for straightforward purchasing and stocking.

Notes: Review application constraints and installation requirements to ensure the part meets your needs.